Panasonic AG-HPX170P operating instructions Setup menu list, 100, Camera Setup screen

Setup menu list (continued)

SCENE FILE screen (continued)

Item	Display	Description of settings
	mode
V DETAIL FREQ	(Camera)	Sets the vertical detail for shooting in 480i progressive mode.
		THIN: Makes the detail thin.
		MID: Makes the detail slightly thicker.
		THICK: Makes the detail thicker.
		When images were shot in the progressive mode in which the vertical
		detail is set as “THIN” or “MID” and are played on a monitoring
		television (60i interlace), you will see flickers caused on horizontal
		lines and almost horizontal oblique lines. When playing back images
		in the progressive mode or when editing images or performing other
		postprocessing, images with a higher resolution will be obtained with
		the THIN or MID setting than with the THICK setting.
NAME EDIT	(Camera)	Edits the name of the selected scene file you have selected with the
		scene file dial.

CAMERA SETUP screen

Item	Display	Description of settings
	mode
ASPECT CONV	(Camera)	elects the aspect ratio of the image you record in 480i format. This item
		cannot be selected when the 1080i or 720P recording format is used.
		(Page 41)
		SIDE CROP: Crops the right and left edges of the image.
		LETTER BOX: Adds black bands at the top and bottom of the image.
		SQUEEZE: Squeezes the image horizontally.
SETUP	(Camera)	Switch the setup level of video signals in 480i format using a P2 card.
		0%:
		Setup is switched to 0% for both the camera output and the recording.
		7.5%A:
		Setup is switched to 7.5% for the camera output and 0% for the
		recording.

100 ___indicates the factory setting.