Panasonic AG-HPX170P Using SD/SDHC memory cards, Installing and removing the SD memory card

Press the MENU button.

Set the POWER switch to ON. (Page 19)

Using SD/SDHC memory cards

You can use SD and SDHC memory cards (the term “SD memory card” is used for both hereafter) to save and load SCENE files and USER files, and to upload clip meta data. (Page 55)

Installing and removing the SD memory card

Installation

THUMBNAIL

OPERATION

PROPERTY META DATA EXIT

DELETE
FORMAT	SLOT1
REPAIR CLIP
	SLOT2
RE-CONNECTION
	SD CARD
EXCH.THUMBNAIL	EXIT
EXIT

1 Lift up the viewfinder, press the side of the card slot cover (A), and slide the cover (B) to open it.

2 Insert the card while making sure it is oriented in the proper direction.

Access lamp

2

3 Close the card slot cover.

Removal

1 Open the card slot cover, and check that the access lamp is not lit.

2 Press the card further into the unit, grasp the card, and then remove.

3 Close the card slot cover.

Formatting SD memory card

1

2 Press the mode button and set it to MCR mode (the MCR lamp lights).

3

4 On the menu, select OPERATION, FORMAT and then SD CARD. (Page 68)

• Select EXIT to cancel the formatting.

5 Select YES on the confirmation screen.

•The selected SD memory card is formatted.

•You can also format from the SD CARD FORMAT option on the CARD FUNCTIONS screen. (Page 110)

•With SDHC cards, 32 KB of capacity will have been used.

Cautions in using SD memory cards

•SD memory cards used with the AG-HPX170P should conform to SD or SDHC standards. Be sure to format cards using the AG-HPX170P.

SD memory cards with the following capacity can be used for the AG-HPX170P.

SD (from 8 MB to 2 GB):

8 MB  16 MB  32 MB  64 MB  128 MB   256 MB  512 MB  1 GB  2 GB

SDHC (4 GB to 16 GB):

4 GB  8 GB  16 GB

For the latest information not available in the Operating Instructions, visit the P2 Support Desk at the following Web sites.

 https://eww.pavc.panasonic.co.jp/pro-av/

•SD memory cards must not be used or stored in an environment where they may be Exposed to high temperatures/humidities;

Exposed to water droplets; or

Electrically charged.

•Be sure always close the cover when using an

SD memory card.

•See also “Checkpoints for using memory cards” on page 122.

Shooting

29