Panasonic AG-HPX170P One-shot recording ONE-SHOT REC, Loop recording Loop REC

•Operation is not possible even if only one of the inserted cards is DIR ENTRY NG CARD. (Page 91)

•After interval recording has started, a recordable P2 card cannot be used even if it is inserted into an empty slot.

•The slots for recording in this mode are indicated by the orange P2 card access lamps.

The slots for recording P2 cards that are inserted after starting recording are indicated by the green P2 card access lamps.

•Text memos cannot be added.

•When continuous one-shot recording is performed, there may be delays in acknowledging the recording operation.

•After one-shot recording has started, a recordable P2 card cannot be used even if it is inserted into an empty slot.

•The slots for recording in this mode are indicated by the orange P2 card access lamps.

•The slots for recording P2 cards that are inserted after starting recording are indicated by the green P2 card access lamps.

•Text memos cannot be added.

One-shot recording (ONE-SHOT REC)

This function records a single shot at each unit of time which has been set.

1 Check that the settings given on page 46 have been established for the OPERATION TYPE item and recording format.

2 Select ONE SHOT under REC FUNCTION. (Page 104)

• For menu operations (Page 94)

3 Set the recording time using ONE-SHOT TIME. (Page 104)

4 Press the START/STOP button.

Recording continues for the duration set in step 2 and then goes on standby.

To stop operation, push the Operation lever in the G direction.

To release standby, either turn off the unit’s power or select NORMAL under REC FUNCTION.

•The following displays will appear on the left of the operation status display.

While recording is underway: I-REC lights up.

In temporary standby: I-PAUSE lights up.

While recording is stopped: The “I-” of

I‑PAUSE flashes.

•The pre-recording function does not work.

•No sound is recorded.

•All data recorded while this mode is active will be contained in one file.

•No guarantees are made for the 1394 output images.

•Operation is not possible even if only one of the inserted cards is DIR ENTRY NG CARD. (Page 91)

Loop recording (LOOP REC)

This function is used to record first on one card
and then on the next when you have inserted two
P2 cards into the card slots. If there is not enough	Shooting
free memory remaining on the second card,
recording returns to the first card whose data will
then be overwritten. When data is overwritten, the
saved clips are deleted, and then the new clips are
recorded in their place. (Clip deletion is performed
approximately 30 seconds before the overwrite.)

1 Check that the settings given on page 46 have been established for the OPERATION TYPE item and recording format.

2 Select LOOP under REC FUNCTION. (Page 104)

• For menu operations (Page 94)

3 Press the START/STOP button. Recording starts.

To stop operation, press the START/STOP button.

To release the function, either turn off the unit’s power or select NORMAL under REC FUNCTION.

•The following displays will appear on the left of the operation status display.

While recording is underway: L-REC lights up.

While recording is stopped: L-PAUSE lights up.

Insufficient memory space: LACK L- flashes.

•Use two P2 cards each with a recording capacity of more than one minute. Recording stops when either card is ejected.

(Continued on the next page)

47