Panasonic AG-HPX170P operating instructions 108, Display Setup screen

Setup menu list (continued)

AV IN/OUT SETUP screen (continued)

Item	Display	Description of settings
	mode
INT MIC	(Camera)	Determines whether or not input from the internal microphone is used
		during recording.
		ON: Uses internal microphone input.
		OFF: Does not use internal microphone input.

DISPLAY SETUP screen

Item	Display	Description of settings
	mode
ZEBRA DETECT 1	(Camera)	Selects the brightness level of the left-leaning zebra patterns on the
		screen.
		50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%
ZEBRA DETECT 2	(Camera)	Selects the brightness level of the right-leaning zebra patterns on the
		screen.
		50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%,
		OFF
		<Note>
		The zebra patterns do not appear if you select OFF.
MARKER	(Camera)	Select ON to display the marker. (Page 40)
		ON, OFF
		To display the marker, press the ZEBRA button.
SAFETY ZONE	(Camera)	Sets SAFETY ZONE to ON or OFF.
		OFF, 90%, 4:3, 13:9, 14:9
FOCUS BAR	(Camera)	Turns the FOCUS ASSIST bar display ON or OFF.
		ON, OFF
		When set to ON, the FOCUS ASSIST bar can be displayed.
VIDEO OUT OSD	(Camera)	Select ON to output the information displayed on the screen together
	(MCR)	with the signals from the VIDEO IN/OUT jack.
		ON, OFF
DATE/TIME	(Camera)	Sets whether to display the date and time on the screen and whether to
	(MCR)	output from the VIDEO IN/OUT jack.
		OFF:
		The date and time are not displayed.
		TIME:
		The time is displayed.
		DATE:
		The date is displayed.
		TIME&DATE:
		The time and date are displayed.
LEVEL METER	(Camera)	Select ON to display the audio level meter.
	(MCR)	ON, OFF
ZOOM·FOCUS	(Camera)	Selects the unit of zoom and focus values.
		OFF, NUMBER, mm/feet, mm/m
		<Note>
		Use the mm/feet or mm/m display only as a general guideline since it is
		not entirely accurate.
CARD/BATT	(Camera)	Select ON to display the remaining P2 card recording capacity and
	(MCR)	remaining battery charge.
		ON, OFF
P2CARD REMAIN	(Camera)	Determines how remaining P2 card capacity is displayed.
	(MCR)	ONE-CARD: Displays how much space is left on the P2 card that is
		currently being recorded.
		TOTAL: Displays the total amount of space that is left on P2 cards
		inserted in the camera.

108 ___indicates the factory setting.