Panasonic AG-HPX170P Adjusting the shutter speed, Press the Shutter button, Standard Off 1/50

Adjusting the shutter speed

SHUTTER button

SPEED SELECT button

BARS	SHUTTER	SPEES SELECT
CH1 SELECT CH2 SELECT		INPUT1	INPUT2
INT(L)	INT(R)	ON	ON
INPUT1	INPUT2	OFF	OFF
INPUT2		MIC POWER+48V
	AUDIO
		ZEBRAREC OIS
COUNTER	RESET/TC SET
LCD		EVF DTL	WFM

1 Press the SHUTTER button.

Each time you press the SHUTTER button, the shutter speed switches between normal (OFF) and the speed you selected with the SPEED SELECT button.

2 After you have pressed the SHUTTER button, press SPEED SELECT to select the shutter speed.

The shutter speed changes as follows each time you press SPEED SELECT + (The order is reversed for the SHUTTER SELECT - button.)

•Remember that the faster the shutter speed, the lower the sensitivity.

•If iris is set to auto, then it will open wider with higher shutter speeds and thereby reduce focal depth.

•It will take longer to focus when the shutter speed has been reduced so it is recommended that the unit be secured to a tripod, etc. for use.

PUSH STILL

1/60.0

The current shutter speed appears on the viewfinder and LCD screens unless you have selected OFF in OTHER DISPLAY in the DISPLAY SETUP screen of the setup menus.

It is not displayed if you have set the shutter speed to normal (OFF).

(Continued on the next page)

Shooting

With the 1080i/60i, 720P/60P and 480i/60i formats

Standard (Off) 1/60	SYNCRO SCAN 1/15 1/30 1/100
	                 
	1/2000 1/1000 1/500 1/250 1/120
With the 1080i/30P, 720P/30P, 480i/30P and 720P/30PN formats
Standard (Off) 1/50	SYNCRO SCAN 1/15 1/30 1/60
	                
	1/1000 1/500 1/250 1/120
With the 1080i/24P, 480i/24P, 1080i/24PA and 480i/24PA formats
Standard (Off) 1/50	SYNCRO SCAN 1/24 1/60
	             
	1/1000 1/500 1/250 1/120
With the 720P/24P and 720P/24PN formats
Standard (Off) 1/50	SYNCRO SCAN 1/12 1/24 1/60
	              
	1/1000 1/500 1/250 1/120

*Bold and underlines indicate formats that can be selected only when VIDEO COM is selected under

OPERATION TYPE, and OFF is selected under DRS in the SCENE FILE screen of the setup menus.

49