Panasonic AG-HPX170P operating instructions 115, Playback, Other

Playback

Cannot play even when I	• Make sure the MCR lamp is on (press the mode button).	P63
press the play button.	No kind of playback operation can be performed unless this lamp
	is on.
Mosaic-like noise appears	• This noise is inherent to digital video technology.	——
when I cue or review a	This is normal.
tape.
Images do not appear on	• Make sure the input selector on your television is set to video	——
the television even though	input.
I have connected the	Read the television’s instructions carefully and select the correct
camera-recorder properly.	video input connector for the camera-recorder.
Cannot hear any sound	• You may have turned down the camera-recorder’s volume control	P75
from the camera-	too far.
recorder’s speaker.	Adjust the volume level using the PAGE/AUDIO MON/
	VAR button+.
Cannot perform hot swap	• This unit does not support hot swap playback.	P86
playback.	To replace one card with another during dubbing, stop the
	dubbing first, and upon completing the replacement, resume it.

Other

Cannot read the data on	• Make sure the SD memory card is formatted correctly.	P29
the SD memory card.	If it is not, format the card in the unit.
The remote control does	• The battery in the remote control may have run out.	P18
not work.	If the remote control fails to work even if it is operated close to the
	remote control sensor of the camera-recorder, it means that the
	battery has run out. Replace it with new one.
	• Make sure the remote control setting is the same for the remote	P18
	control unit and the camera-recorder.
	If the REMOTE setting is different on the remote control and the
	camera-recorder, the remote control will not work.
There is a rattling sound	• There are some parts of the camera that make a rattling sound	——
when the camera-recorder	in the MCR mode or when the POWER switch is OFF. This is
is tilted back and forth.	normal.
A clicking sound is heard	• This initialization operation is performed when the camera starts	——
when the power is turned	up.
on or when the MCR	It occurs due to the construction of the camera and is not
mode is switched to the	indicative of any trouble.
CAM mode..

Reference

115