Panasonic AJ-D440, AJ-D450 manual 4S1-VIDEO OUT connector, 5ANALOG Component Video OUT connector

<Connector area>

!4￿S1-VIDEO OUT connector

￿This is the S-VIDEO output connector.

!5￿ANALOG COMPONENT VIDEO OUT connector

￿The analog component video signal is output from this connector.

!6￿ANALOG COMPOSITE VIDEO OUT connectors

￿The analog composite video signals are output from these connectors.

￿The video signal with signals superimposed on it can be output from the VIDEO OUT3

￿connector.

￿The superimpose function can be set ON or OFF on the setup menu No. 006 (SUPER).

!7￿REMOTE connector

￿The unit can be controlled from an external source by connecting an external controller.

!8￿ENCODER REMOTE connector

￿The external encoder/controller is hooked up to this connector when the video output

￿signal and other settings are to be adjusted from an external source.

￿

!9￿RS-232C connector

￿

@0￿DIGITAL AUDIO IN/OUT connector (optional AJ-YA655P required.)

￿This I/O connector is for digital audio signals which comply with the AES/EBU standard.

￿<Note>

￿Does not input with AJ-D440.

￿

@1SERIAL DIGITAL COMPONENT AUDIO/VIDEO IN/OUT connector (optional AJ-YA750P interface board required)

This I/O connector is for digital component audio and video signals which comply with the SMPTE 259M-C/272M standard.

The optional AJ-YA655P is required for digital audio signal output on the AJ-YA750P board.

<Note>

Does not input with AJ-D440.

– 13 –