STOP mode

1

When the STOP button is pressed, the unit goes into the stop mode. The STOP lamp lights and the tape stops traveling.

In order to protect the tape, the unit goes into the standby OFF mode after the time set by setup menu No. 400 (STILL TIMER) has elapsed. When the STOP, REW, FF or PLAY button is pressed, the unit will go into the appropriate mode.

Still Timer Setting

In order to protect the tape and VTR helical heads, it is recommended that the Still Timer be set for automatic tape protection mode in 30 seconds or under.

Page 37 indicates the settings for menu item 400-Still Timer set. Still Timer settings 4 and below will best protect the tape.

– 22 –

Page 22
Image 22
Panasonic AJ-D450, AJ-D440 manual Stop mode, Still Timer Setting