Panasonic AJ-D440, AJ-D450 manual Basic Setting Description

Setup menus

USER menu

<BASIC> (continued)

	Item		Setting
								Description
No.	Superimposed	No.		Superimposed
	display			display
001	CHARA	0000		.		0	This sets the position		of the characters on the horizontal
		.					plane for the time code and other super displays output to the
	H-POS	.		.
		.		.			VIDEO OUT 3 connector.
		0005				5
		.			.		<Notes>
		.		.
		.		.			1. When setting this item, the DISPLAY SEL status is output
		0012		12
								to VIDEO OUT 3 even if SUPER OFF has been set.
								However, when the menu is exited, operation complies
								with the SUPER OFF/ON setting.
								Also, CHARA TYPE is output to VIDEO OUT 3 according
								to the status set in the menu.
							2. When the DISPLAY SEL setting causes characters to
								extend beyond the edges of the screen, the setting value
								is changed so that the characters are automatically
								displayed in a position on the screen.
002	CHARA	0000		.		0	This sets the position of the characters on the vertical plane
		.					for	the time code and	other super displays output to the
	V-POS	.		.
		.		.			VIDEO OUT 3 connector.
		0018		18
		.			.		<Notes>
		.		.
		.		.			1. When setting this item, the DISPLAY SEL status is output
		0022		22
								to VIDEO OUT 3 even if SUPER OFF has been set.
								However, when the menu is exited, operation complies
								with the SUPER OFF/ON setting.
								Also, CHARA TYPE is output to VIDEO OUT 3 according
								to the status set in the menu.
							2. When the DISPLAY SEL setting causes characters to
								extend beyond the edges of the screen, the setting value
								is changed so that the characters are automatically
								displayed in a position on the screen.
003	DISPLAY	0000			TIME		This selects what information is to be provided by the time code
	SEL	0001			T&STA		and other super displays output to the VIDEO OUT 3 connector.
		0002			T&S&M		0:	Time only.
							1:	Time and status.
							2: Time, status and mode.
							<Notes>
							• When T&S&M has been selected, one of the following displays
							appears on the third line of the superimposed display.
							In the DVCPRO mode: DVCPRO MODE
							In the DV mode:		DV MODE
							In the DVCAM mode:		DVCAM MODE
							• An error message is displayed when an warning or error
							occurs.
004	LOCAL	0000			DIS		This selects the buttons which can be operated on the front
	ENA	0001			ST&EJ		panel when the REMOTE/LOCAL switch has been set to
		0002			ENA		REMOTE.
							0: No buttons can be operated.
							1: Only the STOP and EJECT buttons can be operated.
							2:	All buttons can be operated.
005	TAPE	0000			±12h		This selects the 12 or 24 hour display for the CTL counter.
	TIMER	0001			24h		0:	12 hour display
							1:	24 hour display
006	SUPER	0000			OFF		This selects whether the time code and other super display
		0001			ON		which are output to the VIDEO OUT 3 connector is to shown.
							0:	Not shown.
							1:	Shown.
007	CHARA	0000			WHITE		This selects the display type for the super display output to
	TYPE	0001			W/OUT		the VIDEO OUT 3 connector as well as for displays such as
							the setting menu, etc.
							0: White characters against a black background.
							1: White characters with a black border.

The underline on the setting item denotes the initial setting.

– 31 –