Power supply

Using the BP-90 type battery pack

1 Attach the NP/BP adapter plate.

Insert it in the direction shown by the arrows, and slide it into place.

2 Attach the connectors provided with the NP/BP adapter plate to the positions shown in the figure.

3 Connect these connectors with the connector on the AU-MA402H battery case.

4 Attach the AU-M402H battery case.

Open the battery case cover, and raise it above the rubber cap: screw holes will now be visible. Tighten the screws using a screwdriver, then attach the case to the NP/BP adapter plate and tighten the screws fully.

<Notes>

O Do not pull the rubber cap forcefully.

O When mounting the battery case, take care not to pinch the connecting cord.

5 Connect the plug on the battery pack to the connector inside the case, and insert the battery pack.

<Note>

Before connecting or disconnecting the plug, be absolutely sure to turn off the unit’s power.

23