Attaching the shoulder strap

1 Attach the shoulder strap to the shoulder strap mounting hooks, and adjust the length of the strap.

<Note>

Check that the shoulder strap is securely fastened.

Shoulder strap

The clip opens when it is pressed here.

To detach the shoulder strap, open the clips on the mounting parts and detach.

The clip opens when it is pressed here.

<Note>

This mounting hook is for attaching the tape measure that is used to measure the subject distance.

It is not to be used for the shoulder strap.

Adjusting the shoulder pad position

The shoulder pad can be slid up to 15 mm either backward or forward from the center position (factory setting).

Adjust the pad’s position to operate the unit with the optimum ease.

1 Loosen the two screws.

2 Slide the shoulder pad either backward or forward, and find the optimum position.

3 Tighten the screws to secure the shoulder pad.

1•3

Screws

2 Shoulder pad

Bottom section

37