Attaching the rain cover

Example showing use of the SHAN-

RC700 rain cover

Tighten the cord.

Close using the fastener.

Close using the fastener.

Connecting the extension control unit

By connecting the AJ-EC3 extension control unit (optional accessory), some of the functions can be operated by remote control.

When the AJ-EC3 is connected and the POWER switches on the unit and AJ-EC3 are set to ON, the unit is automatically set to the remote control mode.

Dedicated cable

AJ-

6 5

∫ 1

<Notes>

O Before connecting or disconnecting the dedicated cable, be absolutely sure to set the POWER switches on the unit and AJ-EC3 to OFF.

O When “OFF” has been selected as the ECU DATA SAVE setting on the CAMERA SW MODE screen of FILM (CAM) MAIN MENU 2, all the adjustments and settings made using the AJ-EC3 will be cleared when the unit’s power switch is set to OFF. Neither is it possible to save these adjustments and settings on a setup card.

However, the menu item settings can be saved on a setup card.

When the AJ-EC3 is connected again, its settings will be restored.

O When “ON” has been selected as the ECU DATA SAVE setting on the CAMERA SW MODE screen of FILM (CAM) MAIN MENU 2, all the adjustments and settings made using the AJ-EC3 will not be cleared even when the unit’s power switch is set to OFF.

ECU connector

AJ-EC3

38