Setup card operations
Saving the data settings to the selected file.
9 When the title has been input, turn the JOG dial button to move the arrow (cursor) to the “:” position.
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
TITLE READ
READ USER DATA
m TITLE:22222222
1:5:
2:6:
3:7:
4:8:
10 When the JOG dial button is pressed, the arrow (cursor) returns to the TITLE: item.
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
TITLE READ
READ USER DATA
nTITLE:22222222
1:5:
2:6:
3:7:
4:8:
12 When the JOG dial button is pressed, the following message appears.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
WRITE ?
YES
n
NO 
TITLE :22222222
13 Turn the JOG dial button to move the arrow (cursor) to YES, and press the JOG dial button. When the data saving is completed, the following message appears.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
WRITE OK
YES
nNO
TITLE :22222222
11 Turn the JOG dial button to move the arrow (cursor) to the WRITE item.
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
nWRITE CARD CONFIG TITLE READ READ USER DATA
TITLE:22222222
1:5:
2:6:
3:7:
4:8:
To save the VTR unit’s data, open the VTR CARD READ/WRITE screen, and perform steps 11 to 13.
If one of the following messages appears when the JOG dial button is pressed, the data cannot be saved.
Error message | Remedial action |
|
|
WRITE NG | Insert the card. |
NO CARD |
|
(setup card has not been |
|
inserted) |
|
|
|
WRITE NG | The card was formatted by a |
FORMAT ERROR | device other than the unit. |
(formatting error) | Replace the card. |
|
|
WRITE NG | The card may be defective. |
ERROR | Replace it. |
(the data cannot be saved) |
|
|
|
14 Press the MENU button to exit the menu operations.
The setting menu is cleared, and the displays showing the unit’s current statuses appear at the top and bottom of the viewfinder screen.
75