Setup card operations

Saving the data settings on the card

1 Perform the menu operations (pages 84 to 86), and display the “CAM CARD READ/WRITE” screen.

n< CAM CARD READ/WRITE >

SELECT :1

READ

SELECT :1

WRITE

CARD CONFIG

TITLE READ

READ USER DATA

TITLE:

1:5:

2:6:

3:7:

4:8:

Select the file No.

Give a title to the selected file.

4 Turn the JOG dial button to move the arrow (cursor) to the “TITLE : ” item.

< CAM CARD READ/WRITE >

SELECT :1

READ

SELECT :1

WRITE

CARD CONFIG

TITLE READ

READ USER DATA

nTITLE:

1:5:

2:6:

3:7:

4:8:

2 Turn the JOG dial button to move the arrow (cursor) to the SELECT item which comes avove WRITE, and press the JOG dial button.

< CAM CARD READ/WRITE >

SELECT :1

READ

n SELECT :1

WRITE CARD CONFIG TITLE READ READ USER DATA

TITLE:

1:5:

2:6:

3:7:

4:8:

5 When the JOG dial button is pressed, the arrow (cursor) moves to the title input area, and the input mode is established.

< CAM CARD READ/WRITE >

SELECT :1

READ

SELECT :1

WRITE

CARD CONFIG

TITLE READ

READ USER DATA

m

TITLE:

1:5:

2:6:

3:7:

4:8:

3 Turn the JOG dial button to select a number from 1 to 8, and press the JOG dial button.

6 Turn the JOG dial button until the character to be set appears. When the button is turned, the character displayed is switched in the following sequence:

Space: )

7

letters: A—Z 7

numbers: 0—9 7

symbols: ’, >, <, /, –

7 Press the JOG dial button to enter the character.

8 Turn the JOG dial button to move the arrow (cursor) to the next position (right), and repeat steps 6 and 7 to set the characters (maximum of 8).

74