Setting the electronic shutter

Setting the synchro scan mode

1 Press the SHUTTER switch from ON to SEL and set to SYNCHRO SCAN.

SHUTTER switch

Switching the shutter speed display

The unit enables the SYNCHRO SCAN mode to be displayed on the viewfinder screen to be switched to “1/¢¢¢ (sec.),” “¢¢¢%” or “¢¢¢d (angle)” on the VF DISPLAY screen of FILM (CAM) MAIN MENU 2.

1 Perform the menu operations (pages 84 to 86), and open the VF DISPLAY screen.

n< VF DISPLAY >

 

DISP CONDITION

:NORMAL

DISP MODE

:3

VF OUT

:Y

VF DTL

:4

ZEBRA1 DETECT

:070%

ZEBRA2 DETECT

:085%

ZEBRA2

:SPOT

LOW LIGHT LVL

:45%

SYNCHRO SCAN DISP.:deg

ECU MENU DISP.

:ON

2 In the SYNCHRO SCAN mode, continuous switching inside the 3.0 deg to 350.0 deg (0.8% to 97.2%) range can be achieved by pressing the SYNCHRO (“+” and “–”) buttons.

2 Turn the JOG dial button to move the arrow (cursor) to the SYNCHRO SCAN DISP. item.

< VF DISPLAY >

 

DISP CONDITION

:NORMAL

DISP MODE

:3

VF OUT

:Y

VF DTL

:4

ZEBRA1 DETECT

:070%

ZEBRA2 DETECT

:085%

ZEBRA2

:SPOT

LOW LIGHT LVL

:45%

nSYNCHRO SCAN DISP.:deg

ECU MENU DISP. :ON

3 Press the JOG dial button to set the SYNCHRO SCAN display mode.

Turn the JOG dial button, select the display, and then press the JOG dial button to enter the selection.

sec (seconds) : 1/¢¢¢

%

: ¢¢¢%

deg (angle)

: ¢¢¢d

e.g.

 

When the frame rate is set to 24 fps and exposure time is set to half:

1/48 sec = 50% = 180 deg.

4 Press the MENU button to exit the menu operations.

The setting menu is cleared, and the displays showing the unit’s current statuses appear at the top and bottom of the viewfinder screen.

57