Upper-L, Upper-R | Panasonic AV-HS400AE specification

4. Input/output signal settings

1Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT menu.

2 Turn [F1] to display the Multi1 sub menu.

<Menu display>

Multi1

Split

Pos

Signal

6/15

10Split

1

IN1

4Split

1-8

IN1-8

8Split

FMEM1

FMEM2

CBGD

Upper-L Upper-R

PGM

PVW

AUX KeyOut

3Turn [F2] to select the display mode using the Split item.

4Turn [F4] to select the position (1 to 8, Upper-L and Upper-R in the figures) using the Pos item, and turn [F5] to set the name of the signal using the Signal item.

Different settings are stored for 10-division mode, 4-division mode and 8-division mode.

1 to 8:

This can be set to IN1 to IN8, FMEM1, FMEM2 or CBGD.

IN1 to IN8 is the default setting for Pos1 to Pos8 in any of the modes.

Upper-L, Upper-R:

These can be set to PGM, PVW, AUX or KeyOut.

They cannot be set when the 4-division mode (4Split) is selected. The default settings are PGM for Upper-L and PVW for Upper-R.

The names of the signals selected as the AUX output signals are displayed in [ ] as with [CLN], [PVW] and [PGM].

Some signal names are abbreviated as shown below, and displayed. FMEM1  [FM1], FMEM2  [FM2], CBGD  [CBG], CBAR  [BAR]

77

Image 77

Panasonic AV-HS400AE manual Upper-L, Upper-R, These can be set to PGM, PVW, AUX or KeyOut

Contents

Operating Instructions For Your Safety Please Read the Following Text Carefully Safety precautions How to replace the fuse For Your Safety Please Read the Following Text Carefully For business users in the European Union Contents System settings Input/output signal settings Description Features Precautions for use 2Alarm indicator Alarm  Power indicator PowerSystem/Alarm 8/16 Functions in each area Crosspoint area Wipe area = User buttons User 1, User User button area Transition area CUT button Auto buttonFTB button PinP button List of menu delegation functions LCD menu areaRotary encoders F1 to F5 Positioner X/Y Positioner areaRotary encoder Z Positioner Rotary encoder Valid menu SD memory card area SD memory card access LEDPSD memory card slot    Concerning the recommended SD memory cards SDI signal output connectors SDI Outputs PGM, 1 SDI signal input connectors SDI Inputs 1 toReference input connector/BB output connector REF External synchronization mode \ GPI input connector GPI 3.5 mm diameter stereo mini jack Tally output connector Tally D-sub 15-pin, male, inch screwGround connector AC power input socket in AC 220 V to 240 Where connected ConfigurationSystem Table of optional boards AV-HS400AE Connections Example where the optional board is used Basic operations Selecting the bus modeBackground transition Selecting the bus Manual transition using the fader lever Selecting the transition modeAuto transition Cut transition Wipe How to select the wipe patternsSelecting the wipe pattern Table of wipe patterns  Setting the border colour  Setting the border and soft effectTo call the preset colour Selecting the wipe direction Pos, Y-Pos setting range Setting the wipe start position Modifying wipe  Setting the lighting effect Setting the trimming Key, PinP and DSK priorities KeyHow key composition works Background Key source Lum luminance key/self key Selecting the key typeLinear linear key/EXT key Chroma chroma key/self key Selecting the key fill signal  Selecting the key fill and key source signalsSelecting the key source signal  Setting the fill matte colour Pattern examples Key transitions Key preview Adjusting the luminance key and linear keyOperation Parameter Description of setting Setting range  Executing auto sampling Adjusting the chroma keyPositioner Rotary encoder Z Item operations  Adjusting the chroma keyTips for chroma key adjustments  Making other adjustments Key decorations  Setting the key edge Setting the edge colour Turn F2 to F5 to set the area to be masked Masking the key signals Flying key  PinP combinations using the flying key Selecting the PinP material PinP picture in picturePinP transitions PinP preview  Adjusting the PinP position and size PinP adjustments Select the dot by dot mode  Adjusting the density PinP decorations Trimming settings Selecting the DSK type DSK downstream key Selecting the DSK fill signal  Selecting the DSK fill signal and DSK source signalSelecting the DSK source signal Selecting the DSK material DSK preview DSK adjustmentsDSK transitions DSK decorations  Setting the edge Masking the DSK signals FTB fade to black Setting the colour background Internal colour signals Adjusting the colours  Calling the preset colours Displaying the freeze status Freezing the input signalsSetting freeze  Selecting the output signals using the crosspoint buttons Switching the AUX output Table of stored preset memory Preset memoryTransition area Border Bkgd Wipe Color Description of setting Initial value factory default KeyChroma key  Clear This is used to clear contents in the preset memory Transferring images from the AUX bus Frame memories SD memory cards Initializing the SD memory cards Saving data on SD memory cards Characters which can be used for filenames Loading data from SD memory cards Displaying the SD memory card information Deleting files on SD memory cards Setting the frame synchronizer Input/output signal settingsSetting the SDI input signals and analogue input signals System Mode Input Setting the input modeList of input modes supported 576/50i 1080/59.94i Setting the analogue composite input signals Setting the analogue input gain Input image Setting the up-converter option Setting the DVI input signals Setting the DVI input signals optionAutomatic adjustment of the black level Automatic adjustment of the white level Fit-V 1280  720 1024 768 Fit-H Adjusting the DVI input signals Connector Signal type Output default Assignment Setting the output signalsTypes of output signals DC down-converter Assigning the output signalsNormal Setting the sync signals Phase Video format Adjustment range Adjusting the output signal phaseOutput video signal phase adjustment System standard 1H Output +1H Shortest Output +0.5H Phase adjustment setup Video effects Output signals Down-converter SignalsWhen the 1080/59.94i format is used Frame synchronizer For 1080/59.94i format Example Phase relationship between input signals and output signals Display modes Division mode Setting the multi view displaySetting the screen layout These can be set to PGM, PVW, AUX or KeyOut Upper-L, Upper-R LUM 0%, 25%, 50%, 75%, 100% Setting the split frame and charactersSetting the tally displays Changing the material names  Preset type setting procedure User type setting procedure  Examples of OSD displays Setting the on-screen display OSD Setting the DVI output signals option  Setting the embedded audio data Setting the ancillary data Setting the V ancillary data SQ squeeze Setting the down-converterEC edge crop LB letter box Selecting the video format System settings Setting the 169 squeeze mode Assigning signals to the crosspoints Setting the crosspointsAssigning signals to the crosspoints Button Signal Abbreviation Description Button Signal Description Setting the crosspoint switching Setting the FTB button Setting the user buttonsSetting method Button assignments  Setting the time Setting the date and time Setting the date Setting the IP address Network settingsSetting the subnet mask Setting the gateway Setting the LCD backlight Other settingsSetting editor enable Setting the protocol Setting the GPI Functions that can be controlled from the unit Camera control AW-RP655L RS-422 RS-232C Converter Connection specificationsPin No RS-422RS-232C Converter  Connections for AW-HE100N/E, AW-PH405E or AW-PH360L AW-HE100N/E, AW-PH405E, AW-PH360L Pin No Signal AW-PH400E AW-IF400G Switch settings Connections for AW-PH400E  For controlling the lens zooming  Camera control settings System settings Status displays Alarm status displays Control, Panel, Input, M/E Displaying the version information and option informationIN-SL1, 2 option input slots 1 OUT-SL1, 2 option output slots 1 Initialization External interfaces RS-422 connector Initial setting GPI connectorControl functions that can be assigned Function assigned Description of control Remarks Example of tally connections Pin No Signal name Input/output Description of signal Image transmission functions SpecificationsConnections LAN straight cable How to install the software Operation Setting the IP addressStartup Exit Transmitting images to the unit Transmitting images from the unit Parameter Setting menu table Adjust1 AdjustAdjust2 Hue-Rad Sat-Rad Soft Cancel Type Fill Border Width Soft ModePosition Trim Manual Signal Output Mode ↓ Signal Mode ↓ AnaGainSync ↓ BBSetup GenLock System Phase Signal Scale ↓ MovDet ↓ Sharp ↓ Signal Mode ↓ Size ↓ Scale ↓Signal Chroma Ped Hue Signal Scale ↓ Delay ↓ Sharp ↓ Signal PosCont Speed Power ↓ Mode ↓ 169SQAlarm Power Fan Year Month Date Set ↓ DateTime Hour Minute Second Set ↓ Unit mm Appearance Specifications and standard accessories SDI outputs Video delay timeAnalogue Composite input Optional boards sold separately Standard accessories Appendix glossary Freeze Frame MemoryFTB Fade to Black Genlock Preset Memory Preset BusPreview Programme Bus Panasonic Corporation