LCD menu area, Rotary encoders F1 to F5 | Panasonic AV-HS400AE

1. Functions in each area

1-6. LCD menu area

LLCD

The setting menus are displayed on the LCD.

When the [FUNC] button (;) is pressed and its indicator is lit and then one of the wipe pattern selector buttons (8) is pressed, the setting menu is displayed.

When the buttons listed below are double-clicked, the specified menu is selected. (The menu delegation function) The operation corresponding to the button pressed is also executed.

<List of menu delegation functions>



POWER

ALARM

F1

F2

F3

F4

F5



	Button	Menu
Crosspoint area	KEY	KEY menu/Adjust sub menu (2/9)
(AUX bus selector		CHR KEY menu/Auto sub menu (1/3) (with chroma key selection)
buttons)	DSK	DSK menu/Adjust sub menu (2/7)
	DSK	DSK menu/Adjust sub menu (2/7)
	PinP	PinP menu/Position sub menu (4/6)
Transition area	BKGD	TIME menu/BKGD sub menu (1/5)
	KEY	TIME menu/KEY sub menu (2/5)
	WIPE	WIPE menu/Border sub menu (1/5)
Wipe pattern area	WIPE #5	WIPE menu/WIPEPos sub menu (3/5) (BKGD or KEY)
	SQ #5	WIPE menu/SQPos sub menu (4/5) (BKGD or KEY)
	SL #5	KEY menu/FlyKEY sub menu (9/9) (KEY)

MRotary encoders [F1] to [F5]

These are used to set the parameters displayed on the menus (LCD screen or external monitor). For details on the operations, refer to the sections in “3. Basic operations”.

[F1]: Rotate this rotary encoder to switch the sub menu.

[F2] to [F5]: Rotate these rotary encoders to set the parameters.

When the down arrow (↓) is shown at a menu item, its parameter is set by pressing the corresponding rotary encoder.

When the parameter is one which is set using a numerical value, its default will be restored when the rotary encoder is held down.

(However, the network settings and the date and time settings will not be returned to the defaults.)

Sub menu

Parameter setting area

Adjust 2/9

Clip

0.0

Gain 100.0

Density Invert

100.0Off


Operate here				Operate here				Operate here
using [F1].		Operate here		using [F3].		Operate here		using [F5].
		Operate here				Operate here
		using [F2].				using [F4].

15

Image 15

Panasonic AV-HS400AE manual LCD menu area, Rotary encoders F1 to F5, List of menu delegation functions

Contents

Operating Instructions For Your Safety Please Read the Following Text Carefully Safety precautions How to replace the fuse For Your Safety Please Read the Following Text Carefully For business users in the European Union Contents System settings Input/output signal settings Description Features Precautions for use Functions in each area  Power indicator Power2Alarm indicator Alarm System/Alarm 8/16 Crosspoint area Wipe area = User buttons User 1, User User button area Transition area PinP button Auto buttonCUT button FTB button LCD menu area Rotary encoders F1 to F5List of menu delegation functions Positioner Rotary encoder Valid menu Positioner areaPositioner X/Y Rotary encoder Z  Concerning the recommended SD memory cards SD memory card access LEDSD memory card area PSD memory card slot   External synchronization mode SDI signal input connectors SDI Inputs 1 toSDI signal output connectors SDI Outputs PGM, 1 Reference input connector/BB output connector REF AC power input socket in AC 220 V to 240 Tally output connector Tally D-sub 15-pin, male, inch screw\ GPI input connector GPI 3.5 mm diameter stereo mini jack Ground connector Table of optional boards ConfigurationWhere connected System AV-HS400AE Connections Example where the optional board is used Selecting the bus Selecting the bus modeBasic operations Background transition Cut transition Selecting the transition modeManual transition using the fader lever Auto transition Table of wipe patterns How to select the wipe patternsWipe Selecting the wipe pattern Selecting the wipe direction  Setting the border and soft effect Setting the border colour To call the preset colour Pos, Y-Pos setting range Setting the wipe start position  Setting the lighting effect  Setting the trimmingModifying wipe Key source KeyKey, PinP and DSK priorities How key composition works Background Chroma chroma key/self key Selecting the key typeLum luminance key/self key Linear linear key/EXT key  Setting the fill matte colour  Selecting the key fill and key source signalsSelecting the key fill signal Selecting the key source signal Pattern examples Key transitions Adjusting the luminance key and linear key Operation Parameter Description of setting Setting rangeKey preview Rotary encoder Z Adjusting the chroma key Executing auto sampling Positioner  Adjusting the chroma key Tips for chroma key adjustmentsItem operations  Making other adjustments  Setting the key edge  Setting the edge colourKey decorations Turn F2 to F5 to set the area to be masked Masking the key signals Flying key  PinP combinations using the flying key PinP preview PinP picture in pictureSelecting the PinP material PinP transitions  Adjusting the density PinP adjustments Adjusting the PinP position and size  Select the dot by dot mode PinP decorations Trimming settings Selecting the DSK type DSK downstream key Selecting the DSK material  Selecting the DSK fill signal and DSK source signalSelecting the DSK fill signal Selecting the DSK source signal DSK adjustments DSK transitionsDSK preview DSK decorations  Setting the edge Masking the DSK signals FTB fade to black  Calling the preset colours Internal colour signalsSetting the colour background  Adjusting the colours Freezing the input signals Setting freezeDisplaying the freeze status  Selecting the output signals using the crosspoint buttons Switching the AUX output Border Bkgd Wipe Preset memoryTable of stored preset memory Transition area Description of setting Initial value factory default Key Chroma keyColor  Clear This is used to clear contents in the preset memory Transferring images from the AUX bus Frame memories SD memory cards Initializing the SD memory cards Saving data on SD memory cards Characters which can be used for filenames Loading data from SD memory cards Displaying the SD memory card information Deleting files on SD memory cards Input/output signal settings Setting the SDI input signals and analogue input signalsSetting the frame synchronizer 576/50i 1080/59.94i Setting the input modeSystem Mode Input List of input modes supported Setting the analogue composite input signals Setting the analogue input gain Input image Setting the up-converter option Automatic adjustment of the white level Setting the DVI input signals optionSetting the DVI input signals Automatic adjustment of the black level Fit-H 1280  720 Fit-V 1024 768 Adjusting the DVI input signals Setting the output signals Types of output signalsConnector Signal type Output default Assignment Assigning the output signals NormalDC down-converter Setting the sync signals Adjusting the output signal phase Output video signal phase adjustmentPhase Video format Adjustment range System standard 1H Output +1H Shortest Output +0.5H Phase adjustment setup Frame synchronizer SignalsVideo effects Output signals Down-converter When the 1080/59.94i format is used For 1080/59.94i format Example Phase relationship between input signals and output signals Setting the multi view display Setting the screen layoutDisplay modes Division mode These can be set to PGM, PVW, AUX or KeyOut Upper-L, Upper-R Setting the split frame and characters Setting the tally displaysLUM 0%, 25%, 50%, 75%, 100%  Preset type setting procedure  User type setting procedureChanging the material names  Examples of OSD displays Setting the on-screen display OSD Setting the DVI output signals option Setting the ancillary data  Setting the V ancillary data Setting the embedded audio data LB letter box Setting the down-converterSQ squeeze EC edge crop System settings  Setting the 169 squeeze modeSelecting the video format Button Signal Abbreviation Description Setting the crosspointsAssigning signals to the crosspoints Assigning signals to the crosspoints Button Signal Description Setting the crosspoint switching Button assignments Setting the user buttonsSetting the FTB button Setting method Setting the date and time  Setting the date Setting the time Setting the gateway Network settingsSetting the IP address Setting the subnet mask Setting the protocol Other settingsSetting the LCD backlight Setting editor enable Setting the GPI Functions that can be controlled from the unit Camera control RS-422RS-232C Converter Connection specificationsAW-RP655L RS-422 RS-232C Converter Pin No  Connections for AW-HE100N/E, AW-PH405E or AW-PH360L AW-HE100N/E, AW-PH405E, AW-PH360L Pin No Signal AW-IF400G Switch settings  Connections for AW-PH400EAW-PH400E  For controlling the lens zooming  Camera control settings System settings Status displays Alarm status displays OUT-SL1, 2 option output slots 1 Displaying the version information and option informationControl, Panel, Input, M/E IN-SL1, 2 option input slots 1 Initialization External interfaces RS-422 connector Function assigned Description of control Remarks GPI connectorInitial setting Control functions that can be assigned Example of tally connections Pin No Signal name Input/output Description of signal LAN straight cable SpecificationsImage transmission functions Connections How to install the software Exit Setting the IP addressOperation Startup Transmitting images to the unit Transmitting images from the unit Parameter Setting menu table Hue-Rad Sat-Rad Soft Cancel AdjustAdjust1 Adjust2 Trim Manual Border Width Soft ModeType Fill Position System Phase Signal Mode ↓ AnaGainSignal Output Mode ↓ Sync ↓ BBSetup GenLock Signal Scale ↓ Delay ↓ Sharp ↓ Signal Mode ↓ Size ↓ Scale ↓Signal Scale ↓ MovDet ↓ Sharp ↓ Signal Chroma Ped Hue Power Fan Mode ↓ 169SQSignal PosCont Speed Power ↓ Alarm Hour Minute Second Set ↓ DateYear Month Date Set ↓ Time Unit mm Appearance Specifications and standard accessories Composite input Video delay timeSDI outputs Analogue Optional boards sold separately Standard accessories Appendix glossary Genlock Frame MemoryFreeze FTB Fade to Black Programme Bus Preset BusPreset Memory Preview Panasonic Corporation