Panasonic AV-HS400AE manual Other settings, Setting the LCD backlight, Setting editor enable

5. System settings

5-6. Other settings

5-6-1. Setting the LCD backlight

The LCD backlight can be set to ON or OFF.

1Press the [FUNC] button to light its indicator, and press the [SYSTEM] button to display the SYSTEM menu.

2 Turn [F1] to display the System sub menu.

3 Turn [F3], and select On or Off for the backlight using the LCD-BL item.

<Menu display>

System	BusMode	LCD-BL	EditEN	Protcol
2/16	PGM/PST	On	On	GVG-A

A/B Off Off

GVG-B

P/TCont

P/TDirt

5-6-2. Setting editor enable

The user can set whether to enable control from an external device (editor) connected to the RS-422 connector.

On the System sub menu, turn [F4] to set On or Off for control from the external device (editor) connected to the RS-422 connector using the EditEN item.

On: Control is enabled.

Off: Control is disabled.

EditEN item On and Off can be assigned to one of the user buttons.  See 5-3-1.

5-6-3. Setting the protocol

Set the RS-422 protocol.

On the System sub menu, turn [F5] to set the protocol using the Protcol item.

GVG-A:The GVG protocol is complied with.

The wipe pattern number starts from 0.  See 6-1.

GVG-B:The GVG protocol is complied with.

The wipe pattern number starts from 1.  See 6-1.

P/TCont: The controller for the camera or controller for the pan-tilt head is controlled.

This setting is selected when the unit is connected to a controller and a multiple number of cameras or pan-tilt heads are to be controlled.

P/TDirt: This setting is selected when the unit is connected directly to a pan-tilt head, and a camera or pan-tilt head is to be controlled.

If “P/TCont” or “P/TDirt” is selected as the Protcol item setting, “—” is displayed for the EditEN item. At this time, the user buttons will not work.

90