Frame synchronizer, Input, Signals | Panasonic AV-HS400AE guide

4. Input/output signal settings

<Phases and delay amounts of input/output signals during HD format use>

Frame synchronizer

			FS:
			On, Off
Input			Mode:
Input			Normal, UC or
signals			Normal, UC or
signals			D by D (cannot be selected
			D by D (cannot be selected
			when the system format is
			720p)

			 See 4-1-1.

Video effects

Output signals

		1
	DC
	(Down-converter)
	Delay:	2
	90H (75H) or 1F	2
	90H (75H) or 1F

 See 4-11.

When the 1080/59.94i format is used:

For 1080/50i, 720/59.94p and 720/50p, the delay of “Output signal 2 DC (90H)” is further delayed by +1F.

For 1080/50i and 720/50p, 90H indicated below becomes 75H.

OutPhs	Input

System	Mode		FS

Non-

synchronized

input

	Output signal 1		Output signal 2		Output signal 2
	Normal		DC (90H)		DC (1F)
	Phase	Delay	Phase	Delay	Phase	Delay
		amount		amount		amount

Sync signal (Ref): Black burst signal (BBST), tri-level sync signal (TRI), internal reference signal (INT)

1H	Normal	Off	Not possible	Ref+1H	1H	1+90H	1H+90H	In-phase	1H+1F
								with 1
	Normal	On	Possible	Ref+1H	Max.	1+90H	Max.	In-phase	Max.
	UC/	On	Possible		1F+1H		1F+1H	with 1	2F+1H
	D by D	(Forced)					+90H
	D by D	(Forced)
0H	Normal/	On	Possible	In-phase	Max.	1+90H	Max.	In-phase	Max.
(Example 1)	UC/	(Forced)		with Ref	1F		1F+90H	with 1	2F
	D by D

Sync signal (Ref): Black burst signal (BBAD)

1H	Normal	Off	Not possible	Ref–90H	1H	1+90H	1H+90H	In-phase	1F+1H
				+1H				with 1
	Normal	On	Possible	Ref–90H	Max.	1+90H	Max.	In-phase	Max.
	UC/	On	Possible	+1H	1F–90H		1F+1H	with 1	2F–90H
	D by D	(Forced)			+1H				+1H
	D by D	(Forced)
0H	Normal/	On	Possible	Ref–90H	Max.	1+90H	Max.	In-phase	Max.
(Example 2)	UC/	(Forced)			1F–90H	(In-phase	1F	with 1	2F–90H
	D by D					with Ref)

Conversion based on the HD format applies for 1H.

When DVE effects (SQ, SL, 3D) have been used as the video effects, the output signal is delayed by +1F.

The phase and delay amount for the DVI-I input signals are the same as when UC/D by D is selected since the frame synchronizer is set to the On mode.

The DVI-I output signals are delayed by +1F.

When images are output to a multi view display, they are delayed by +1F.

When DVI-I output signals are output to a multi view display, the output images are delayed by +2F.

74

Image 74

Panasonic AV-HS400AE manual Frame synchronizer, Input, Signals, Video effects Output signals Down-converter

Contents

Operating Instructions Safety precautions For Your Safety Please Read the Following Text Carefully For Your Safety Please Read the Following Text Carefully How to replace the fuse For business users in the European Union Contents Input/output signal settings System settings Features Description Precautions for use System/Alarm 8/16  Power indicator Power2Alarm indicator Alarm Functions in each area Crosspoint area Wipe area User button area = User buttons User 1, User Transition area FTB button Auto buttonCUT button PinP button List of menu delegation functions LCD menu areaRotary encoders F1 to F5 Rotary encoder Z Positioner areaPositioner X/Y Positioner Rotary encoder Valid menu PSD memory card slot   SD memory card access LEDSD memory card area  Concerning the recommended SD memory cards Reference input connector/BB output connector REF SDI signal input connectors SDI Inputs 1 toSDI signal output connectors SDI Outputs PGM, 1 External synchronization mode Ground connector Tally output connector Tally D-sub 15-pin, male, inch screw\ GPI input connector GPI 3.5 mm diameter stereo mini jack AC power input socket in AC 220 V to 240 System ConfigurationWhere connected Table of optional boards Connections AV-HS400AE Example where the optional board is used Background transition Selecting the bus modeBasic operations Selecting the bus Auto transition Selecting the transition modeManual transition using the fader lever Cut transition Selecting the wipe pattern How to select the wipe patternsWipe Table of wipe patterns To call the preset colour  Setting the border and soft effect Setting the border colour Selecting the wipe direction Setting the wipe start position Pos, Y-Pos setting range Modifying wipe  Setting the lighting effect Setting the trimming How key composition works Background KeyKey, PinP and DSK priorities Key source Linear linear key/EXT key Selecting the key typeLum luminance key/self key Chroma chroma key/self key Selecting the key source signal  Selecting the key fill and key source signalsSelecting the key fill signal  Setting the fill matte colour Key transitions Pattern examples Key preview Adjusting the luminance key and linear keyOperation Parameter Description of setting Setting range Positioner Adjusting the chroma key Executing auto sampling Rotary encoder Z Item operations  Adjusting the chroma keyTips for chroma key adjustments  Making other adjustments Key decorations  Setting the key edge Setting the edge colour Masking the key signals Turn F2 to F5 to set the area to be masked  PinP combinations using the flying key Flying key PinP transitions PinP picture in pictureSelecting the PinP material PinP preview  Select the dot by dot mode PinP adjustments Adjusting the PinP position and size  Adjusting the density PinP decorations Trimming settings DSK downstream key Selecting the DSK type Selecting the DSK source signal  Selecting the DSK fill signal and DSK source signalSelecting the DSK fill signal Selecting the DSK material DSK preview DSK adjustmentsDSK transitions  Setting the edge DSK decorations Masking the DSK signals FTB fade to black  Adjusting the colours Internal colour signalsSetting the colour background  Calling the preset colours Displaying the freeze status Freezing the input signalsSetting freeze Switching the AUX output  Selecting the output signals using the crosspoint buttons Transition area Preset memoryTable of stored preset memory Border Bkgd Wipe Color Description of setting Initial value factory default KeyChroma key  Clear This is used to clear contents in the preset memory Frame memories Transferring images from the AUX bus SD memory cards Initializing the SD memory cards Saving data on SD memory cards Loading data from SD memory cards Characters which can be used for filenames Deleting files on SD memory cards Displaying the SD memory card information Setting the frame synchronizer Input/output signal settingsSetting the SDI input signals and analogue input signals List of input modes supported Setting the input modeSystem Mode Input 576/50i 1080/59.94i Setting the analogue input gain Setting the analogue composite input signals Setting the up-converter option Input image Automatic adjustment of the black level Setting the DVI input signals optionSetting the DVI input signals Automatic adjustment of the white level 1024 768 1280  720 Fit-V Fit-H Adjusting the DVI input signals Connector Signal type Output default Assignment Setting the output signalsTypes of output signals DC down-converter Assigning the output signalsNormal Setting the sync signals Phase Video format Adjustment range Adjusting the output signal phaseOutput video signal phase adjustment Phase adjustment setup System standard 1H Output +1H Shortest Output +0.5H When the 1080/59.94i format is used SignalsVideo effects Output signals Down-converter Frame synchronizer Phase relationship between input signals and output signals For 1080/59.94i format Example Display modes Division mode Setting the multi view displaySetting the screen layout Upper-L, Upper-R These can be set to PGM, PVW, AUX or KeyOut LUM 0%, 25%, 50%, 75%, 100% Setting the split frame and charactersSetting the tally displays Changing the material names  Preset type setting procedure User type setting procedure Setting the on-screen display OSD  Examples of OSD displays Setting the DVI output signals option  Setting the embedded audio data Setting the ancillary data Setting the V ancillary data EC edge crop Setting the down-converterSQ squeeze LB letter box Selecting the video format System settings Setting the 169 squeeze mode Assigning signals to the crosspoints Setting the crosspointsAssigning signals to the crosspoints Button Signal Abbreviation Description Setting the crosspoint switching Button Signal Description Setting method Setting the user buttonsSetting the FTB button Button assignments  Setting the time Setting the date and time Setting the date Setting the subnet mask Network settingsSetting the IP address Setting the gateway Setting editor enable Other settingsSetting the LCD backlight Setting the protocol Setting the GPI Camera control Functions that can be controlled from the unit Pin No Connection specificationsAW-RP655L RS-422 RS-232C Converter RS-422RS-232C Converter AW-HE100N/E, AW-PH405E, AW-PH360L Pin No Signal  Connections for AW-HE100N/E, AW-PH405E or AW-PH360L AW-PH400E AW-IF400G Switch settings Connections for AW-PH400E  Camera control settings  For controlling the lens zooming System settings Alarm status displays Status displays IN-SL1, 2 option input slots 1 Displaying the version information and option informationControl, Panel, Input, M/E OUT-SL1, 2 option output slots 1 Initialization RS-422 connector External interfaces Control functions that can be assigned GPI connectorInitial setting Function assigned Description of control Remarks Pin No Signal name Input/output Description of signal Example of tally connections Connections SpecificationsImage transmission functions LAN straight cable How to install the software Startup Setting the IP addressOperation Exit Transmitting images to the unit Transmitting images from the unit Setting menu table Parameter Adjust2 AdjustAdjust1 Hue-Rad Sat-Rad Soft Cancel Position Border Width Soft ModeType Fill Trim Manual Sync ↓ BBSetup GenLock Signal Mode ↓ AnaGainSignal Output Mode ↓ System Phase Signal Chroma Ped Hue Signal Mode ↓ Size ↓ Scale ↓Signal Scale ↓ MovDet ↓ Sharp ↓ Signal Scale ↓ Delay ↓ Sharp ↓ Alarm Mode ↓ 169SQSignal PosCont Speed Power ↓ Power Fan Time DateYear Month Date Set ↓ Hour Minute Second Set ↓ Appearance Unit mm Specifications and standard accessories Analogue Video delay timeSDI outputs Composite input Standard accessories Optional boards sold separately Appendix glossary FTB Fade to Black Frame MemoryFreeze Genlock Preview Preset BusPreset Memory Programme Bus Panasonic Corporation