How to mount the ROP in a rack

<NOTE> ≥ The AW-CB400 is 100 mm wide. If it is to be installed in a full-size rack (which accommodates units totaling 420 mm in width), provide panels or other parts to supplement the AW-CB400’s width so that it will fill the rack width-wise.

≥If the AW-CB400 is joined to the AW-RP400, the resulting width will be equivalent to that of the full width of the rack (which accommodates units totaling 420 mm in width).

1Remove the rubber caps on the side panels.

2Use the accessory mounting screws (M4!8 mm) to attach the rack-mounting adaptors. Remove the rubber caps.

Rack-mounting adaptors

ENGLISH

AW-CB400

Accessory mounting

Remove the rubber caps.screws (M4!8 mm) 4 pcs

Joining the ROP to the AW-RP400 and mounting the joined-up units in a rack

1Remove the rubber caps on the side panels of the AW-CB400.

2Attach the accessory join-up screws (stepped screws) to the two places on the side of the ROP which is to be joined to the AW-RP400.

3Adhere the joining stickers onto the side panels of the AW-RP400 concentrically with the join-up screws.

4Align the holes of the AW-CB400 with the join-up screws, shift in the direction shown by the arrow, and fit the two units together to make a single integrated unit.

5Attach the join-up fixture to bottom panels of the AW-RP400 and AW-CB400.

6Attach the rack-mounting adaptors using the mounting screws (M4!8 mm) provided.

Join-up screws (stepped screws)

❈When the AW-RP400 is to be joined on the left of the AW-CB400.

Join-up screws (stepped screws)

Joining sticker

Rubber cap

AW-RP400

Joining sticker

Join-up fixture

AW-CB400

 

 

Mounting screws (accessory)

 

M4!8 mm ..... 4 pcs

18 (E)