Panasonic BL-PA300KTA Main unit, PLC Indicator, LAN Indicator, MASTER Indicator, SETUP Button

Introduction

Main unit

-PA300 BL

-PLC HD

ER

MAST

LAN

PLC

SETUP

(1) (5)

(2)(6)

(3)(7)

(4)

RESET

DEFAULT

FACTORY

(1)PLC Indicator

Lights to indicate that the adaptor is connected to the HD-PLCnetwork. For more information, see page 19.

(2)LAN Indicator

Lights when a LAN cable is connected to the adaptor, and flashes when data is being sent or received. For more information, see page 19.

(3)MASTER Indicator

Lights when the adaptor is configured as the master. For more information, see page 19.

(4)SETUP Button

Used to register the adaptor (see page 21) or test the terminal’s network speed (see page 17).

(5)Mode Selector

The position of this selector during registration (see page 21) determines whether the adaptor is configured as the master or as a terminal.

(6)LAN Jack

Connects the adaptor to a network device, such as a broadband router, hub, computer, etc. (see page 16).

[For assistance, please call: 1-800-272-7033] 13