Panasonic BL-PA300KTA warranty Connecting adaptors to network devices, Installation

Installation

Connecting adaptors to network devices

Once you have placed the adaptors where you plan to use them and are satisfied with the network speed test results for your terminals (see page 17), follow the procedure below to connect your adaptors to your network devices (broadband router, hub, computer, network printer, network camera, etc.). This will integrate your HD-PLCnetwork with your home network.

1.Confirm that each adaptor is plugged in correctly to the wall outlet.

•Do not plug adaptors in upside-down (i.e., with the LAN jack facing up).

2.Connect a LAN cable to each adaptor’s LAN jack.

•The LAN indicator of each adaptor turns green.

•If an adaptor’s LAN indicator does not turn green, see page 23.

3.Connect the other end of each LAN cable to a network device.

•Up to 16 adaptors can be connected to the same network. If a hub is used, up to 8 devices can be connected to each adaptor.

•Avoid connecting more than one adaptor to the same hub or router.

•Refer to the illustration on page 11 for an example of an integrated HD-PLCnetwork.

You are now ready to use your computers, network printers, network cameras, etc.

16