Panasonic BL-PA300KTA warranty Testing a terminal’s network speed, Plclan Master, Result, Speed

Useful Information

Testing a terminal’s network speed

Once you have connected the adaptors where you plan to use them, follow the procedure below to test the speed of each terminal’s network connection to the master. Make sure that the terminal has already been registered to a master (see page 21).

1.Press and hold the terminal’s SETUP button for about 1 second.

•The indicators light one at a time.

PLCLAN MASTER

2.After a few seconds, the network speed test result is displayed.

3.Refer to the chart below to determine the network speed.

PLC	LAN	MASTER	Result	Speed
			No link	—
			Good	Less than
				10 Mbps*1
			Better	10 Mbps to
				30 Mbps*1
			Best	More than
				30 Mbps*1

[For assistance, please call: 1-800-272-7033] 17