110
Dealing with Problems (Advanced)
When the battery pack is used, the
screen is darker than when the AC
adaptor is connected
Press
Fn
+
F2
and adjust the brightness. Note, however, that when the
brightness is increased, the battery run ning time will become shorter.
Brightness can be set to separate levels for when the AC adaptor is connected
and when it is disconnected.
An afterimage appears (e.g., green,
red, and blue dots remain on the
display) or there are dots not
displaying the correct colors
If an image is displayed for a prolonged period of time, an afterimage may
appear. This is not a malfunction. The afterimage will disappear when a
different screen is displayed.
High-precision and advanced technologies are necessar y in the production of
color liquid crystal displays (color LCDs). Therefore, if 0.002% or les s of the
picture elements either fail to light or remain constantly lit (tha t is, more than
99.998% of elements are functioning properly), no defect is considered to exist.
The external display no longer
displays properly
When an external display not compatible with the power saving mode is used
with the computer, the display may not function correctly when the computer
enters the power saving mode. In such cases, turn off the power to the externa l
display.
When you want to display the fonts or
icons at a larger size
Change the size of the icons, etc. using "Icon Enlarger " (page 100).
To enlarge a part of the screen, use Loupe Utility (page 101).
During simultaneous display, one of
the screens becomes disordered
Try changing the display by pressing
Fn
+
F3
.
If you continue to experience problems, try changing the display destinati on in
the following menu.
[start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Extreme
Graphics] - [Devices]
When the [Command Prompt] is set to "Full Screen" by pressing
Alt
+
Enter
,
the picture is displayed on one of the screens only. When the window display is
restored by pressing
Alt
+
Enter
, the picture is displayed on both screens.
When a video such as an MPEG file is
being played with Windows® Media
Player, the display destination cannot
be switched using
Fn
+
F3
The display destination cannot be switched while a vide such as an MPEG file
is playing. Stop playing the vide before switching the display destination.
Setup Utility
[Enter Password] is displayed Enter the Supervisor Password or User Password. If you have forgotten it,
contact Panasonic Technical Support.
Display