60
PC CardsInserting a PC Card
1Unlock the cover by sliding the latch (A) to the right.
2Slide the latch down, and then without releasing it, open the cover (B)
as illustrated.
3Simply slide the PC Card right-side-up until it snaps into place.
Refer to the operating instructions of each card on how to inser t the card.
CAUTION
When using a PC Card to connect a peripheral device (SCSI, IEEE 1394, etc.), install
following procedure below (one example).
AConnect the peripheral device to the card.
BTurn the device on.
CSlide the card in until it snaps into place.
When inserting a card, do not force the card in if difficu lty is encountered. Depending
on the shape of the card, a segment may remain protruding from the s lot after
Inserting/Removing the PC Card