27
Software Keyboard
The software keyboard enables you to perform the same operations as the internal keyboard
by touching the screen with the stylus (included).
1Press the input panel button .
A. The system menu is displayed.(page 28)
B. The software keyboard will be moved to the four corners of the screen.
C. One tap : Use a s the short cut key.
Two taps : The same function as the key.
D. The action i s the same as a right mouse button click. (The same function as the
key.)
2Touch the software keyboard with the stylus to input characters etc.
3Press the input panel button to close the software keyboard.
NOTE
You can also start up the software keyboard using the following procedure.
Select [start] - [All Programs] - [Panasonic] - [Software Keyboard].
If you want to press shortcut key, after pressing one key (the key turns blue), press the
second key in a continuous manner. For example, if you want to type
Ctrl
+
C
, after
pressing
Ctrl
, Press
C
.
When using two or more keys in combination (
Ctrl
+
C
etc.), use the internal
keyboard or the software keyboard alone.
When
Fn
is pressed, the function key will change to the display shown at left. (The
Fn
key function does not work on the Windows logon screen or the Welcome screen.)
Ctrl
+
Alt
+
Del
cannot be input through the software keyboard (except when
logging on).
Depending on the language, some keys are displayed in orange. These keys are used
to input characters such as "ë", "ö", etc. You can set input languages for each
application.(⇒ Windows help) The software keyboard will switch to the keyboard
layout in the language set for the selected application.
To select the language, use the language bar (e.g. ) on the taskbar. If the software
keyboard layout does not change to the language you have set, select the title bar of
the software keyboard then select the application again. Even if the langua ge bar

Using the Software Keyboard