121
Dealing with Problems (Advanced)
Unable to read/write to the hard disk Your drive or file may not have been properly set.
Check to see if the hard disk is full. If it is full, delete unnece ssary files.
You cannot use a hard disk drive for which [Enable] has been selected in the
[Hard Disk Lock] setting of the Setup Utility by another computer.
Your hard disk content may be corrupted. Contact Panasonic Technical
Support.
When the previous item is not the
cause
Try testing another drive or media.
Touch Pad / Touchscreen
The cursor cannot be controlled
properly
If you are using an external mouse, ensure that the external mouse has been
connected correctly.
Restart the computer by using the keyboard.
(Press ,
U
, and select [Restart] with
R
.)
If the computer does not respond to keyboard commands, read " No response"
(page 122).
The cursor does not move in scrolling
area of the touch pad
When the Microsoft® IntelliMouse™ Wheel mode or the original mode is set for
the touch pad, only scroll operations are possible for the right par t or bottom
part of the touch pad. In this case, cursor operations are possible by using the
work surface excluding the right part or bottom par t. When no mode is set, the
entire surface of the touch pad can be used for cursor operations.
Unable to input using the touch pad H as the Setup Utility been used to set [Touch Pad] to [Enable]?
When external mouse drivers are installed (e.g., IntelliMou se), the touch pad
may not be used.
Has the touch pad driver been properly installed?
Unable to point correctly with the
stylus included with the computer
As a result of the physical characteristics of the touchscreen, som etimes the
position of the stylus does not match the position of the curs or on the screen.
This is not a malfunction. Perform [Calibration]. (page 25)
Unable to input by touching the display Has the Setup Utility been used to set [Touchscreen] to [Enable]?
When mouse drivers are installed (i.e. IntelliMouse), the touchscreen is unable
to be used.
Has the touchscreen driver been properly installed?
Disk Operations