QArranging the Cables to the Cable Holder and their Wiring Order
•Pull the surplus length of the Cable coming from the LCD side to inside of the unit.
(If the surplus length comes outside, it will be caught by the center cover during setting.)
•Fit the Cables to the corresponding grooves of the Cable Holder.
•Ensure the Cables in the Cable Holder are wired in the correct order.
Safety Working
Be sure to wire the Cables in the correct order.
No.1: LAN Cable | No.8: TP Power Cable | No.9: Modem Cable |
|
| |
No.2: |
|
|
Black Antenna |
|
|
Cable |
|
|
No.3: |
|
|
Gray Antenna |
|
|
Cable |
|
|
No.4: Empty |
|
|
No.5: I/O Cable |
|
|
Cable Holder
No.6: LCD Cable
No.7: LCD Cable with the tube
Fit the portion using the Tape in the notch.
Fit the Black Tube to the end of the rib.
Safety Working
Cover the Cables using the Tape. Fold the Tape in half
and attach it to the Cables.
QArranging the FAN Cable
Safety Working
Lead the FAN Cable into the space next to the Board.
FAN Motor | Main PCB |
Tape
Fix the FAN Cable.
FAN Cable
Connector (CN28)
Connect the FAN Cable.
