Panasonic manual Speaker Connections, Fuse, 34CQ-DFX602N, E N G L I S H

E

N

G

L

I

S

H

31

Speaker Connections

Caution: Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.

¡Use ungrounded speaker only.

¡The maximum speaker output should be 50 W or more. (If used with the optional power amplifier, the speaker output should be higher than the maximum amplifier output.)

¡The speaker impedance should be 4 - 8 Ω.

¡This unit uses the BTCL circuit, so each speaker should be connected separately using parallel vinyl insulated cords.

¡The speaker cords and the power amplifier unit should be kept away (about 30 cm apart) from the antenna and antenna extension cord.

¡Never connect the speaker cord to the body of the car.

¡Do not use a 3-wire type speaker system having a common earth lead.

¡Do not connect more than one speaker to one set of speaker leads.

Fuse

Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or connecting the unit directly without a fuse, could cause fire or damage to the unit.

If the replacement fuse fails, contact your nearest authorized Panasonic Service Center.

34CQ-DFX602N