- 105 -
Connecting to other equipment
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to
be printed out and instruct that printing be started on the camera’s LCD monitor.
•Some printers can print directly from the card removed from the camera. For details, refer to
the operating instructions of your printer.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures from the built-in memory.
Check print quality and other settings on the printer before printing the pictures.
AUSB connection cable (supplied)
•Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause a malfunction.)
BAlign the marks, and insert.
•Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler
(optional). If the remaining battery power becomes low while the camera and the printer are
connected, the alarm beeps. If this happens dur ing printi ng, st op prin ting at on ce. If not p rinting ,
disconnect the USB connection cable.

Connect the camera to a printer via the USB connection cable A

(supplied).

•When the camera is connected to the printer, the cable disconne ct prohibit icon [å]
appears. Do not disconnect the USB cable while [å] is displayed.

Touch [PictBridge(PTP)].

Note
•Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause malfunction .
•Before connecting or disconnecting the AC adaptor (optional), turn the camera off.
•Before inserting or removing a car d, turn the camera off, and disconnect th e USB connection
cable.
•Motion pictures cannot be printed out.