Others
- 120 -
Message Display
Confirmation messages or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.
[This picture is protected]
>Delete the picture after cancelling the protect setting. (P99)
[Some pictures cannot be deleted]/[This picture cannot be deleted]
•Pictures not based on the DCF standard cannot be deleted.
>If you want to delete some pictures, format the card after saving necessary data on a PC
etc. (P39)
[Cannot be set on this picture]
•[Text Stamp] or [Print Set] cannot be set for pictures not based on the DCF standard.
[Not enough space on built-in memory]/[Not enough memory on the card]
•There is no space left on the built-in memory or the card.
•When you copy pictures from the built-in memory to the card (batch copy), the pictures are
copied until the capacity of the card becomes full.
[Some pictures cannot be copied]/[Copy could not be completed]
•The following pictures cannot be copied.
–When a picture with the same name as the picture to be copied exists in the copy
destination. (Only when copying from a card to the built-in memory.)
–Files not based on the DCF standard.
•Moreover, pictures recorded or edited by other equipment may not be copied.
[Built-In Memory Error
Format built-in memory?]
•This message will be displayed when you format the built-in memory on a PC.
>Format the built-in memory on the camera again. (P39) The data on the built-in memory
will be deleted.
[Memory card error.
This card cannot be used in this camera.
Format this card?]
•It is a format that cannot be used with this unit.
>Insert a different card.
>Format the card again with the camera after saving necessary data on a PC etc. (P39)
The data on the card will be deleted.