- 13 -
Preparation
Inserting and Removing the Card (optional)/the Battery•Check that this unit is turned off.
•We recommend using a Panasonic card.
Slide the card/battery door to open it.
•Always use genuine Panasonic batteries.
•If you use other batteries, we cannot
guarantee the quality of this product.
Battery: Being careful about the battery
orientation, insert all the way until you
hear a locking sound and then check
that it is locked by lever A. Pull the
lever A in the direction of the arrow to
remove the battery.
Card: Push it securely all the way until
you hear a “click” while being careful
about the direction in which you insert
it. To remove the card, push the card
until it clicks, then pull the card out
upright.
B:Do not touch the connection terminals of t he card.
1:Close the card/battery door.
2:Firmly slide the card/battery door to
the end until you hear a locking
sound.
Note
•Remove the battery after use.
•The battery will be exhausted if left for a long period of time after being charged.
•Turn the camera off and wait for the “LUMIX” display on the LCD monitor to clear before
removing the card or battery. (O therwis e, t his unit may no lo nger op erate nor mally and th e ca rd
itself may be damaged or the recorded pi c t ur e s ma y be lost.)
モヵヵユンヺ ヤモンュ