Others
- 128 -
•Pictures cannot be printed using a printer which does not support PictBridge.
>Select [PictBridge(PTP)] when connecting. (P105)
>When using a printer with a Cropping or borderless printing function, cancel this function
before printing. (For details, refer to the operating instructions for the printer.)
>When you order photo studios to print pictures, ask th e p hot o stud io i f the 16 :9 pict ures can
be printed.
>Touch the [Setup] menu icon [ ] and then select [~] to set the desired language. (P40)
•In dark places, the AF Assist Lamp (P82) lights red to make it easier to focus on a subject.
•Is [AFAssist Lamp] on the [Rec] Mode menu set to [ON]? (P82)
•The AF Assist Lamp does not turn on in bright places.
•The surface of the camera may become warm during use. This does not af fect the perfo rmance
or quality of the camera.
•When the brightness changes due to zoom or camera movement etc., the lens may click and
the picture on the screen may drastically change. However, the picture is not affected. The
sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
•If you do not use the camera for a long time, the clock may be reset.
>[Please set the clock] message will be displayed; please re-set the clock. (P18)
•It is possible that the subject may be warped slightly , or th e borders ge t colour ed, depend ing on
the zoom magnification, due to the characteristics of the lens, but this is not a malfunction.
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
Others
An unreadable language was selected by mistake.
A red lamp sometimes turns on when the shutter button is pressed halfway.
The AF Assist Lamp does not turn on.
The camera becomes warm.
The lens clicks.
The clock is reset.
When pictures are taken using the zoom, they are slightly distorted and the
areas around the subject contain colours which are not actually present.