Panasonic DMC-FS25 Taking Pictures using the Built-in Flash, Move 1 ‰ Move 3/4 to select a mode

Advanced (Recording pictures)

[REC] mode: ñ·¿

Taking Pictures using the Built-in Flash

APhoto flash

Do not cover it with your fingers or other objects.



Switching to the appropriate flash setting

Set the flash to match the recording.

Move 1 [‰].

Move 3/4 to select a mode.

•You can also move 1 [‰] to select.

•For information about flash settings that can be selected, refer to “Available flash settings by Recording mode”. (P39)

Press [MENU/SET].

•You can also press the shutter button halfway to finish.

•The menu screen disappears after about 5 seconds. At this time, the selected item is automatically set.

Item	Description of settings
‡: AUTO	The flash is automatically activated when the recording conditions make it necessary.
:	The flash is automatically activated when the recording conditions make it necessary.
	It is activated once before the actual recording to reduce the red-eye
AUTO/Red-eye	phenomenon (eyes of the subject appearing red in the picture) and then
reduction¢	activated again for the actual recording.
	• Use this when you take pictures of people in low lighting conditions.
‰:	The flash is activated every time regardless of the recording conditions.
Forced flash ON	• Use this when your subject is back-lit or under fluorescent lights.
:	• The flash setting is set to [	] only when you set [PARTY] or
Forced ON/	[CANDLE LIGHT] in Scene mode. (P45)
Red-eye
reduction¢

:If you take a picture with a dark background, this feature will slow the shutter speed when the flash is activated so that the dark background will become

Slow sync./	bright. Simultaneously it reduces the red-eye phenomenon.
Red-eye	• The flash setting is set to [	] only when you set
reduction¢
	[NIGHT PORTRAIT], [PARTY], [CANDLE LIGHT] in Scene mode (P45).
Œ:	The flash is not activated in any recording conditions.
Forced flash	• Use this when you take pictures in places where the use of the flash
OFF	is not permitted.

¢The flash is activated twice. The subject should not move until the second flash is activated. Interval until the second flash depends on the brightness of the subject.

38 VQT1W65