Panasonic DMC-FS25 English/Deutsch¢/Français¢/Español/ Italiano¢/繁體中文¢/¢¢, Auto Demo

Preparation

[VERSION DISP.]

It is possible to check which version of firmware is on the camera.

[FORMAT]

The built-in memory or card is formatted. Formatting irretrievably deletes all the data so check the data carefully before formatting.

•Use a battery with sufficient battery power or the AC adaptor (DMW-AC5PP; optional) and DC coupler (DMW-DCC4; optional) when formatting. Do not turn the camera off during formatting.

•If a card has been inserted, only the card is formatted. To format the built-in memory, remove the card.

•If the card has been formatted on a PC or other equipment, format it on the camera again.

•It may take longer to format the built-in memory than the card.

•If the built-in memory or the card cannot be formatted, consult your nearest Service Center.

For USA and Puerto Rico assistance, please call:

1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call:

1-800-99-LUMIX (1-800-995-8649) or

send e-mail to: lumixconcierge@ca.panasonic.com

~[LANGUAGE]

Set the language displayed on the screen.

[ENGLISH]/[DEUTSCH]¢/[FRANÇAIS]¢/[ESPAÑOL]/ [ITALIANO]¢/[繁體中文]¢/[¢]¢

¢Not displayed on DMC-FS25P

•If you set a different language by mistake, select [~] from the menu icons to set the desired language.

	The camera automatically detects jitter and the movement of the
	subject and displays these on the indicator. ([JITTER, SUBJ.
	MOVE DEMO.])
	The camera’s features are displayed as slide shows. ([AUTO
	DEMO])
	[JITTER, SUBJ. MOVE DEMO.]
DEMO [DEMO MODE]	A Jitter detection demonstration		A
	B	Movement detection demonstration
			B
	[AUTO DEMO]:
	[OFF]
	[ON]

•In Playback mode, [JITTER, SUBJ. MOVE DEMO.] cannot be displayed.

•Press [DISP.] to close [JITTER, SUBJ. MOVE DEMO.].

•[JITTER, SUBJ. MOVE DEMO.] is an approximation.

•[AUTO DEMO] has no TV output capability.

VQT1W65 25