Panasonic DMC-FS25 Troubleshooting, Battery and power source, Recording, No Battery Power Remains

Others

[NO BATTERY POWER REMAINS]

•The remaining battery power is low.

>Charge the battery.

[THIS BATTERY CANNOT BE USED]

•The battery cannot be recognized by the camera.

>Use a genuine Panasonic battery. If this message is displayed even when a genuine Panasonic battery is used, contact the dealer or your nearest Service Center.

•The battery cannot be recognized as its terminal is dirty.

>Remove any dirt etc. from the terminal.

Troubleshooting

First, try out the following procedures (P97–103).

If the problem is not resolved, it may be improved by selecting [RESET] (P24) on the [SETUP] menu when taking pictures.

Battery and power source

The camera cannot be operated even when it is turned on.

•The battery is not inserted correctly. (P14)

•The battery is exhausted.

The LCD monitor turns off while the camera is turned on.

•Is [AUTO LCD OFF] (P23) of the [ECONOMY] mode active?

>Press the shutter button halfway to cancel these modes.

•The battery is exhausted.

The camera turns off immediately after it is turned on.

•The battery is exhausted.

•If you leave the camera on, the battery will be exhausted.

>Turn the camera off frequently by using the [ECONOMY] mode etc. (P23)

The [CHARGE] lamp flashes.

•Is the temperature of the battery excessively high or low? If it is, it will take longer than usual to charge the battery or charging may remain incomplete.

•Are the terminals of the charger or battery dirty?

>Wipe off the dirt using a dry cloth.

Recording

The picture cannot be recorded.

•Is the [REC]/[PLAYBACK] selector switch at the [!] setting? (P26)

•Is there any memory remaining on the built-in memory or the card?

>Delete the pictures which are not necessary to increase the available memory. (P35)

VQT1W65 97