Advanced (Recording pictures)

[REC] mode: ·¿

Taking Pictures using Auto Bracket

In this mode, 3 pictures are automatically recorded in the selected exposure compensation range each time the shutter button is pressed. You can select the picture with the desired exposure from the 3 pictures with different exposures.

With Auto bracket d1 EV

 

 

1st picture

2nd picture

3rd picture

d0 EV

j1 EV

i1 EV

Move 3 [È] several times until [AUTO BRACKET] appears, set the compensation range of the exposure with 2/1.

• When you do not use Auto bracket, select [OFF] (0).

Press [MENU/SET] to finish.

• You can also press the shutter button halfway to finish.

Note

When setting Auto bracket, [ ] appears on the screen.

When taking pictures using Auto bracket after setting the exposure compensation range, the pictures taken are based on the selected exposure compensation range.

When the exposure is compensated, the exposure compensation value appears on the lower left of the screen.

The Auto bracket setting is canceled if you turn the camera off or [POWER SAVE] is activated.

When Auto bracket is set, the Auto review function is activated regardless of the Auto review setting. (The picture is not enlarged.) You cannot set the Auto review function in the [SETUP] menu.

The exposure may not be compensated with Auto bracket depending on the brightness of the subject.

[Œ] is set for the flash when Auto bracket is set.

Burst is canceled when Auto bracket is set.

Auto bracket cannot be used when in [TRANSFORM], [HI-SPEED BURST], [FLASH BURST], [STARRY SKY], [PIN HOLE], [FILM GRAIN] and [PHOTO FRAME] in Scene mode.

44 VQT1W65

Page 44
Image 44
Panasonic DMC-FS25 Taking Pictures using Auto Bracket, REC mode · ¿, With Auto bracket d1 EV 1st picture 2nd picture