Basic

Extended optical zoom mechanism

When you set the picture size to [ ] (3 million pixels), the 12M (12.1 million pixels) CCD area is cropped to the center 3M (3 million pixels) area, allowing a picture with a higher zoom effect.

Note

The digital zoom cannot be set when õ has been selected.

The indicated zoom magnification is an approximation.

“EZ” is an abbreviation of “Extended optical Zoom”.

The optical zoom is set to Wide (1k) when the camera is turned on.

If you use the zoom function after focusing on the subject, focus on the subject again.

The lens barrel extends or retracts according to the zoom position. Take care not to interrupt the motion of the lens barrel while the zoom lever is rotated.

When using the digital zoom, [STABILIZER] may not be effective.

When using the digital zoom, we recommend using a tripod and the self-timer (P42) for taking pictures.

The extended optical zoom cannot be used in the following cases.

In Macro zoom mode

In [TRANSFORM], [HIGH SENS.], [HI-SPEED BURST], [FLASH BURST], [PIN HOLE], [FILM GRAIN] or [PHOTO FRAME] in Scene mode

In Motion picture mode

[DIGITAL ZOOM] cannot be used in the following cases.

In [TRANSFORM], [SPORTS], [BABY1]/[BABY2], [PET], [HIGH SENS.],

[HI-SPEED BURST], [FLASH BURST], [PIN HOLE], [FILM GRAIN] or [PHOTO FRAME] in Scene mode

When [INTELLIGENT ISO] is set

[PLAYBACK] mode: ¸

Playing back Pictures ([NORMAL PLAY])

Slide the [REC]/[PLAYBACK] selector switch A to [(].

• Normal playback is set automatically in the following cases.

– When the mode was switched from the [REC] to [PLAYBACK]

– When the camera was turned on while the [REC]/ [PLAYBACK] selector switch was at [(].

Move 2/1 to select the picture.

2: Play back the previous picture

1: Play back the next picture

VQT1W65 33

Page 33
Image 33
Panasonic DMC-FS25 operating instructions Playing back Pictures Normal Play, Slide the REC/PLAYBACK selector switch a to