Panasonic DMC-FX07, DMC-FX3 operating instructions Reset, Select on Connection, Video OUT

Preparation

[NO.RESET]

Press [ MENU/SET ] to display the [SETUP] menu and select the item to set. (P19)

Set this when you want the file number of the next recording to start from 0001. (The folder number is updated and the file number starts from 0001.)

•A folder number between 100 and 999 can be assigned.

When the folder number reaches 999, the number cannot be reset. We recommend formatting the card after saving the data on a PC or elsewhere.

•To reset the folder number to 100, format (P90) the built-in memory (DMC-FX3) or the card first and then use this function to reset the file number.

A reset screen for the folder number will then appear. Select [YES] to reset the folder number.

•Refer to P92 for detailed information about the file number and the folder number.

•The [NO.RESET] setting also affects simple mode [ ].

[RESET]

Press [ MENU/SET ] to display the [SETUP] menu and select the item to set. (P19)

The [REC] or [SETUP] menu settings are reset to the initial settings.

•The birthday setting for [BABY1]/[BABY2] (P56) in scene mode, the number of days that have passed since the departure date for [TRAVEL DATE] (P58) and the [WORLD TIME] setting (P60) are also reset when the [SETUP] menu settings are reset. Also, [FAVORITE] (P80) is fixed to [OFF] and [ROTATE DISP.] (P81) is fixed to [ON].

•The folder number and the clock setting are not changed.

22

[USB MODE]

Press [ MENU/SET ] to display the [SETUP] menu and select the item to set. (P19)

Select the USB communication system after or before connecting the camera to your PC or your printer with the USB connection cable (supplied).

[ SELECT ON CONNECTION]:

Select either [PC] or [PictBridge (PTP)] if you connected the camera to a PC or a printer supporting PictBridge.

[ PC]:

Set after or before connecting to a PC.

[ PictBridge (PTP)]:

Set after or before connecting to a printer supporting PictBridge.

•When [PC] is selected, the camera is connected via the “USB Mass Storage” communication system.

•When [PictBridge (PTP)] is selected, the camera is connected via the “PTP (Picture Transfer Protocol)” communication system.

[VIDEO OUT]

(Playback mode only) (P98)

Press [ MENU/SET ] to display the [SETUP] menu and select the item to set. (P19) [NTSC]: Video output is set to NTSC

system.

[PAL]: Video output is set to PAL system.

VQT0Y69