Panasonic DMC-FX3 Press 3 to select SINGLE PICTURE and then press MENU/SET, ∫ Single picture

Connecting to other equipment

•To print the age in [BABY1]/[BABY2] (P56) in scene mode or the departure date for [TRAVEL DATE] (P58), use the software [LUMIX Simple Viewer] in the CD-ROM (supplied) and print from the PC. For information about this, refer to the separate operating instructions for PC connection.

•To find out more about PictBridge compliant printers, contact your local dealer.

∫Single picture

1 Press 3 to select [SINGLE PICTURE] and then press [MENU/SET].

PictBridge

SINGLE PICTURE

DPOF PICTURE

			MENU
SELECT	SET	MENU	/SET

2 Press 2/1 to select the picture and then press 4.

PictBridge 100_0001

1/3

PLEASE SELECT

THE PICTURE TO PRINT

SELECT
PRINT	EXIT MENU

•The message disappears in about 2 seconds.

3 Press 3 to select [PRINT START] and then press [MENU/SET].

SINGLE PICTURE
PRINT START
PRINT WITH DATE	１秒
NUM. OF PRINTS	1 OFF
PAPER SIZE
PAGE LAYOUT		MENU
CANCEL SELECT	SET MENU	/SET

• Press [MENU/SET] to cancel printing.

4 Disconnect the USB connection cable after printing.

∫Setting date printing, the number of

prints, the paper size and the page layout

Select and set each item in step 3.

•Items not supported by the printer are displayed in gray and cannot be selected.

•When you want to print pictures in a paper size or a layout which is not supported by the camera, set [PAPER SIZE] or

[PAGE LAYOUT] to [ ] and then set the paper size or the layout on the printer. (For details, refer to the operating instructions of the printer.)

•[PRINT WITH DATE]

	Settings on the printer are
	prioritized.
[OFF]	Date is not printed.
[ON]	Date is printed.

•If the printer does not support date printing, the date cannot be printed on the picture.

95

VQT0Y69