Connecting to other equipment

Printing the Pictures

By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (supplied), you can select the pictures to print and start printing on the camera’s screen.

Set print settings such as the print quality on the printer beforehand. (Read the printer operating instructions.)

DIGITAL

AV OUT

DC IN

A: USB connection cable (supplied)

B: AC adaptor (DMW-AC5; optional)

It may take time to print some pictures. Use a battery with sufficient battery power (P13) or the AC adaptor (DMW-AC5; optional) when you connect to a printer.

Turn the camera off before inserting or removing the cable for the AC adaptor (DMW-AC5; optional).

94

1 Turn on the camera and the printer.

2 Connect the camera to a printer via the USB connection cable A (supplied).

Connect the USB connection cable with the [ ] mark facing the [2] mark on the [DIGITAL] socket.

Hold the USB connection cable at C and insert straight in or take straight out.

3 Press 4 to select [PictBridge (PTP)] and then press [MENU/ SET].

USB MODE

PLEASE SELECT

THE USB MODE.

 

 

 

PC

 

 

 

 

 

PictBridge(PTP)

 

MENU

 

 

 

 

 

SELECT

SET MENU

/SET

If you set [USB MODE] in the [SETUP] menu to [PictBridge (PTP)] in advance, it is not necessary to set this every time you connect to a printer. (P22)

Do not use any other USB connection cables except the supplied one.

If a card is not inserted when the camera is connected to the PC, you can edit or access the picture data on the built-in memory. If a card is inserted, you can edit or access the picture data on it. (DMC-FX3)

You cannot switch between the built-in memory and the card while the camera is connected to the printer. When you want to switch between the built-in memory and the card, disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the printer again. (DMC-FX3)

VQT0Y69

Page 94
Image 94
Panasonic DMC-FX07, DMC-FX3 Printing the Pictures, Press 4 to select PictBridge PTP and then press MENU/ SET