Panasonic DMC-FX3, DMC-FX07 Setting the date printing with Dpof print in advance

Connecting to other equipment

∫Setting the date printing with the

DPOF print in advance

We recommend setting DPOF date printing with [DPOF PRINT] (P83) in advance when the printer supports it. If you select [DPOF PICTURE], printing starts and the recording date is printed.

∫Layout printing

•When printing a picture several times on 1 sheet of paper

For example, if you want to print a picture 4 times on 1 sheet of paper, set

[PAGE LAYOUT] to [ ] and then set [NUM. OF PRINTS] to 4.

•When printing different pictures on 1 sheet of paper (only in DPOF printing)

For example, if you want to print 4 different pictures on 1 sheet of paper, set [PAGE LAYOUT] to [ ] and then set [COUNT] in [DPOF PRINT] (P82) to 1 for each of the 4 pictures.

•Do not disconnect the USB connection

cable when the cable disconnection warning icon [ ] is displayed. (Depending on the printer, the icon may not be displayed.)

•If the remaining battery power becomes low while the camera and the printer are connected, the status indicator blinks and the alarm beeps. If this happens during printing, press [MENU/SET] and stop printing at once. If not printing, disconnect the USB connection cable.

•The camera is receiving an error message from the printer when the [¥] indication lights orange during printing. After finishing printing, make sure there are no problems with the printer.

•If the total number of DPOF prints or the number of DPOF pictures printed is high, pictures may be printed several times. The remaining number of prints indicated may differ from the number set. This is not a malfunction.

•With date printing, the setting on the printer may take priority over the setting on the camera. Check the date print setting on the printer also.

97

VQT0Y69