Panasonic DMC-FX3, DMC-FX07 Connecting to a PC, Turn on the camera and the PC

Connecting to other equipment

Connecting to a PC

You can acquire recorded pictures to a PC by connecting the camera and the PC. The software [LUMIX Simple Viewer] (for Windows®) in the CD-ROM (supplied) allows you to easily acquire pictures recorded with the camera to a PC, print them and send them by e-mail.

If you use “Windows 98/98SE”, install the USB driver and then connect it to the computer.

For information about installing [LUMIX Simple Viewer] etc., refer to the separate operating instructions for PC connection.

DIGITAL

AV OUT

DC IN

A: USB connection cable (supplied)

B: AC adaptor (DMW-AC5; optional)

•Use a battery with sufficient battery power or the AC adaptor (DMW-AC5; optional).

•Turn the camera off before inserting or removing the cable for the AC adaptor (DMW-AC5; optional).

1 Turn on the camera and the PC.

2 Connect the camera to a PC via the USB connection cable A (supplied).

•Connect the USB connection cable with the [ ] mark facing the [2] mark on the [DIGITAL] socket.

•Hold the USB connection cable at C and insert straight in or take straight out. (If you forcibly insert the USB connection cable at a slant or upside down you can deform the connection terminals and damage the camera or the connected equipment.)

ACCESS

D: This message appears during data transfer.

3 Press 3 to select [PC] and then press [MENU/SET].

USB MODE

PLEASE SELECT

THE USB MODE.

PC

PictBridge(PTP)

MENU

SELECT SET MENU /SET

•If you set [USB MODE] in the [SETUP] menu to [PC] in advance, it is not necessary to set this every time you connect to a PC. (P22)

•If you set [USB MODE] to [PictBridge (PTP)] and then connect the camera to the PC, messages may appear on the screen of the PC.

Select [Cancel] to close the messages and disconnect the camera from the PC. Set [USB MODE] to [PC] again.

91

VQT0Y69