Recording pictures (advanced)
2 Press the shutter button halfway.
•When the subject is focused, the focus indication 1 lights.
•The remaining recording time (approximation) appears on the screen.
3 Press the shutter button fully to start the recording.
35S
•By pressing the shutter button fully again, the recording stops.
•If the memory card becomes full during recording, the camera stops automatically.
∫Available recording time (seconds)
SD Memory Card | Motion rate | |
Capacity | 10fps | 30fps |
|
|
|
8 MB | 36 | 10 |
|
|
|
16 MB | 83 | 26 |
|
|
|
32 MB | 177 | 59 |
|
|
|
64 MB | 365 | 123 |
|
|
|
128 MB | 742 | 253 |
|
|
|
256 MB | 1482 | 508 |
|
|
|
512 MB | 2989 | 1027 |
|
|
|
1 GB | 5752 | 1978 |
|
|
|
•The recordable time is an approximation.
•The picture size is fixed to 320k240 pixels.
•The motion images cannot be recorded with audio.
•If using a MultiMediaCard, after recording motion images, the card access indication may appear for a while, but this is not a malfunction. The file is being loaded to the MultiMediaCard.
•The settings of auto focus/zoom/aperture values are fixed to what they are when recording starts (in the first frame).
•If you use a card with little capacity, recording may stop while you are recording motion images.
•When motion images recorded with this camera are played back on other equipment, the quality of pictures may be deteriorated or it may not be possible to play them back.
•The motion images recorded with setting [MOTION RATE] to [30fps] cannot be played back on a camera which does not support [30fps] of motion rate.
•The review function cannot be used.
•You cannot set [MODE2] on the Optical Image Stabilizer function.
•Keep the camera away from magnetized equipment or equipment which generates electromagnetic waves (e.g. a microwave oven, TV, cell phone or video game equipment, etc.) as far as possible. If not, pictures may be distorted due to electromagnetic wave radiation.
57
