Preparation

Setting Up the Clock (Turning the camera [ON] for the first time)

■Initial setting

The clock is not set when the camera is shipped. When you turn the camera on, the following screen appears. (It does not appear in playback mode.)

PLEASE SET THE CLOCK

3CLOCK SET

1�Press [MENU/SET].

2�Press E/R/W/Q to select the date and time.

3CLOCK SET

0 00 1 JAN 2008

D/M/Y

CANCEL A SELECT

ATime at the home area

BTime at the travel destination (P57) C Appearence

W/Q : Select the desired item.

E/R: Set date, time and the display order for the date and time.

A : To cancel without setting the clock.

3�Press [MENU/SET].

•When [MENU/SET] has been pressed to complete the settings without the clock having been set, set the clock correctly by following the “Changing the clock setting (In normal picture mode)” procedure below.

Checking the clock setting

Press [DISPLAY] several times.

–Current date and time will be displayed on the bottom left of the screen for about 5 seconds.

Changing the clock setting

1Press [MENU/SET].

2Press E/R to select [CLOCK SET].

3Press Q and perform steps 2 and 3 for setting.

4Press [MENU/SET] to close the menu.

• You can also set the clock in the [SETUP] menu. (P20)

•When batteries have been inserted for more than 3 hours, the clock setting is stored in the camera for approximately 3 months even if the batteries are removed.

•You can set the year from 2000 to 2099. The 24-hour system is used.

•Set the date so that the correct date is printed when you order prints or use the text stamp.

•If the clock is set, the correct date can be printed even if the date is not displayed on the screen of the camera.

- 17 -