Preparation

LCD Monitor and Changes to the Display

■Display in normal picture mode []. (at the time of purchase)

1 2 3 4 5 6 7

10�Built-in memory / Card

( or lights red during accessing.)

• Do not do the following when the

access indication lights.
– Turn the camera off.

13

12

1� Recording mode2� Flash mode (P39)

8 9 10

11

– Remove the batteries or the card.

– Shake or impact the camera.

– Disconnect the AC adaptor (optional).

• Observe the above caution also when

pictures are being read or deleted or

the built-in memory (or the card) is

being formatted.

• The access time for the built-in

•The flash icon turns red when activating the flash and pressing the shutter button halfway.

3� AF area

•The AF area displayed is bigger than usual when taking pictures in dark places.

4� Focus (P28)5� Picture size (P60)6� Quality (P60)

�6: Jitter alert indication (P30)

7� Battery indication

•The battery indication turns red and blinks. (The status indicator blinks when the LCD monitor is turned off.)

Replace with new batteries or fully charged Ni-MH batteries.8� Remaining number of recordable pictures (P108)9� Recording indication

memory may be longer than the

access time for a card. (Max. about

7 sec.)

11�Shutter speed (P28)12�Aperture value (P28)

•If the exposure is not adequate, the aperture value and the shutter speed turn red. (They do not turn red when

the flash is activated.)

13�Optical image stabilizer (P66)

•For details about other displays, refer to P96.

■Changing the display

Press [DISPLAY] to change the display. Choose whether to display information such as the number of pixels and possible number of images for recording while you are shooting. For details, refer to P37.

- 25 -