■Available flash settings by recording mode The available flash settings depend on the
recording mode.
(○ : Available,
Û2 It becomes Forced Flash ON [t],
when the backlight compensation function is activated.
•The flash setting may change when you change the recording mode. Change the flash setting again if necessary.
•Flash settings are retained even if you switch the camera off. However, scene mode flash settings return to the factory settings when you change the scene mode.
ISO sensitivity Available flash range
AUTO | 30 cm to 5.9 m (Wide) |
| 30 cm to 3.2 m (Tele) |
ISO100 | 30 cm to 1.8 m (Wide) |
| 30 cm to 1.0 m (Tele) |
ISO200 | 40 cm to 2.6 m (Wide) |
| 30 cm to 1.4 m (Tele) |
ISO400 | 60 cm to 3.7 m (Wide) |
| 40 cm to 2.0 m (Tele) |
ISO800 | 80 cm to 5.3 m (Wide) |
| 60 cm to 2.9 m (Tele) |
ISO1600 | 115 cm to 7.5 m (Wide) |
| 90 cm to 4.1 m (Tele) |
•The available focus range differs depending on the recording mode.
•When you use the flash when you have set ISO sensitivity to [AUTO], ISO sensitivity automatically becomes a maximum of [ISO1000]. ([ISO400] in the [BABY1]/[BABY2] modes and [ISO800] in the [PET] or [SPORTS] modes)
•The edges of the picture may appear dark if you shoot a very close subject with the flash while the zoom lever is close to the W side. Zoom in slightly if this occurs.
•Available flash range varies depending on ISO sensitivity in [HIGH SENS.].
–W: approximately 115 cm to 15 m
–T: approximately 90 cm to 8.3 m
- 40 -