Connecting to other equipment

Playing Back Pictures with a TV Screen

■Playing back pictures using the AV cable (supplied)

•Set the [TV ASPECT]. (P23)

•Turn the camera and the TV off.

1�Connect the AV cable A(supplied) to the [AV OUT] socket of the camera.

•Connect the AV cable with the [c] mark facing the [Q] mark on the [AV OUT] socket.

•Hold B and then insert or pull the AV cable straight.

2�Connect the AV cable to the video input and the audio input sockets of the TV.

1Yellow: to the video input socket

2White: to the audio input socket

•Do not use any other AV cables except the supplied one.

•You can display pictures on a TV only when the recording/playback switch is set to the playback [Q].

•The top and bottom or left and right of the picture may be cut off slightly when it is displayed due to the characteristics of the TV.

•Read the TV operating instructions too.

•Pictures might be slightly blurred if you show them vertically on a television.

•You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system when you set [VIDEO OUT] in the [SETUP] menu.

■Playback pictures on TV with SD Memory Card slot

You can put your SD Memory Card in a television with an SD Memory Card slot to show still images.

•Depending on the television, some pictures may not take up the whole screen.

•You cannot play motion pictures. To play back motion pictures, connect the camera to the TV with the AV cable (supplied).

•You can use SDHC Memory Card on SDHC Memory Card compatible TV only.

•You may be unable to play MultiMedia Cards.

3�Turn the TV on and select external input.4�Turn the camera on and playback the picture.

- 94 -