Message displays
[Some pictures cannot be deleted] [This picture cannot be deleted]
→Save needed data on a computer or other device, and then use [Format] on the camera. (→30)
[No additional selections can be made]
●The number of pictures that can be deleted at once has exceeded. ●More than 999 pictures have been set as [Favorite].
●The number of pictures allowing [Resize] (multiple settings) at once has exceeded.
[Please turn camera off and then on again] [System Error]
●The lens is not working correctly.
→Turn on power again.
(Consult the dealer or your nearest Service Centre if display still remains)
[Some pictures cannot be copied] [Copy could not be completed]
●Pictures cannot be copied in the following cases:
→Picture of same name already exists in
→File is not of DCF standard.
→Picture taken or edited on a different device.
[Not enough space on
●There is no space left on the
[Built-In Memory Error] [Format built-in memory?]
●Displayed when formatting
→Reformat directly using camera. Data will be deleted.
[Memory card error. This card cannot be used in this camera. Format this card?]
●The card format cannot be used with this camera.
→Save needed data on a computer or other device, and then use [Format] on the camera. (→30)
[Insert SD card again] [Try another card]
●Access to card has failed.
→Insert card again. ●Try with a different card.
Meanings and required responses to major messages displayed on LCD monitor.
[Memory Card Error] [Memory card parameter error]
●Card is not of SD standard.
●When cards in capacities of 4 GB or more are used, only SDHC or SDXC Memory Cards are supported.
[Read Error]/[Write Error] [Please check the card]
●Data read has failed.
→Check whether card has been inserted correctly (→11). ●Data write has failed.
→Turn off power and remove card, before
●Try with a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the card]
●When recording motion picture, use a card rated with an SD speed class∗ of “Class 6” or higher.
∗SD speed class refers to a specification for sustained write speeds.
●If recording stops even when using a card with speed of “Class 6” or faster, the data writing speed is low. We recommend backing up the data on the memory card and reformatting it. (→30)
●Motion picture recording may be automatically terminated with certain cards.
[A folder cannot be created]
●Folder numbers in use have reached 999.
→Save needed data on a computer or other device, and then use [Format] on the camera. (→30)
[Picture is displayed for 16:9 TV] [Picture is displayed for 4:3 TV]
●AV cable is connected to camera.
→To remove message immediately → Press [MENU/SET].
→To change aspect ratio → Change [TV Aspect] (→29). ●USB connection cable is only connected to camera.
→Message disappears when cable is also connected to another device.
72 VQT3E65 | VQT3E65 73 |
