Advanced (Playback)

[PROTECT]

You can set Protection for pictures you do not want to be deleted by mistake.

Select [PROTECT] on the [PLAYBACK] Mode menu. (P21)

Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].

[SINGLE] [MULTI]

Select the picture, and then press [MENU/SET].

When [MULTI] has been selected

Repeat these steps for each picture.

The settings are canceled when [MENU/ SET] is pressed again.

Press 2/1 to

Press 3/4/2/1

select the picture.

to select the

 

pictures.

Press [] to return to the menu screen.

Press [MENU/SET] to close the menu.

Canceling all the [PROTECT] settings

1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].

2Press 3 to select [YES] and then press [MENU/SET].

3Press [MENU/SET] to close the menu.

• If you press [MENU/SET] while canceling Protection, the canceling will stop halfway.

Note

The Protect setting may not be effective on other equipment.

Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in memory or the card is formatted.

Even if you do not protect pictures on a card, they cannot be deleted when the card’s Write-Protect switch is set to [LOCK].

- 106 -

Page 106
Image 106
Panasonic DMCFH1S, DMCFH3S, DMCFH3R, DMCFP3S, DMCFP3AB, DMCFP3R, DMCFH3K, DMCFH3P 106, Protect, When Multi has been selected